1.
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
2.
Analysis of Inspection and Measuring Method for 120° Distributing Angle Errors of Crankshaft Crankpins
曲轴曲拐120°角度误差检测方法分析
3.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
4.
Research on a Newly Combinational Tri-turned Crankshaft for Diaphragm Pump
新型组合式隔膜泵用三拐曲轴的研究
5.
Analysis on Measuring Accuracy in Inspecting Crank Angles for Six-cylinder Crankshafts
六缸发动机曲轴曲拐夹角检测方法的精度分析
6.
Study on Making Process and Mould Structure of None-phase Angle Crankshaft with Four Cylinder Sleeve
无相位角四拐曲轴的制坯工艺及模具结构优化
7.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
8.
triple-barrel pump
三联式筒泵(三个泵筒与一个吸液管相连，由三拐曲轴驱动三个活塞产生均匀液流)
9.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
10.
Inflection Point
拐点，弯曲点，转折点
11.
Full of twists and turns;tortuous.
弯弯曲曲的；迂回的充满弯曲和拐弯的；曲折的
12.
crankshaft journal face hardening machine
曲轴轴颈表面淬火机床
13.
Crankshaft main journal out of round or worn
曲轴主轴颈不圆或磨损
14.
crankshaft journal milling machine
曲轴轴颈铣削专用机床
15.
Replace crankshaft or grind journals
更换曲轴或磨光轴颈
16.
The feed holes for the crankshaft main bearings.
曲轴主轴承进入口。
17.
Crankshaft and main bearings service
曲轴和主轴承的维修
18.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套