说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 允许偏差
1.
The maximum allowable misalignment of the coupling is0.02 mm.
靠背轮找正的最大允许偏差为0.02毫米。
2.
Edge processing deviation should be allowed to meet the norms.
边缘加工允许偏差应符合规范的规定.
3.
Quality of electric energy supply-Admissible deviation of supply voltage
GB12325-1990电能质量供电电压允许偏差
4.
Deviation should be allowed to comply with the norms. The shear machine error should be allowed to meet the norms.
气割的允许偏差应符合规范的规定.机械剪切的允许偏差应符合规范的规定.
5.
" Hot-rolled beam steel-Dimensions, shape, weight and tolerances"
GB/T706-1988热轧工字钢尺寸、外形、重量及允许偏差
6.
" Hot-rolled channel steel-Dimensions, shape, weight and tolerances"
GB/T707-1988热轧槽钢尺寸、外形、重量及允许偏差
7.
Wrought aluminium and aluminium alloy sheets and strips--Tolerances on form and dimensions
GB/T3194-1998铝及铝合金板、带材的尺寸允许偏差
8.
" Hot-rolled equal--leg angle steel--Dimensions, shape, weight and tolerances"
GB/T9787-1988热轧等边角钢尺寸、外形、重量及允许偏差
9.
" Dimensions,shape,weight and tolerances for forged flats"
GB/T16761-1997锻制扁钢尺寸、外形、重量及允许偏差
10.
" Dimensions, shape, weight and tolerances for hot-rolled flats"
GB/T704-1988热轧扁钢尺寸、外形、重量及允许偏差
11.
Quality of electric energy supply--Permissible deviation of frequency for power system
GB/T15945-1995电能质量电力系统频率允许偏差
12.
Dimenisions shape weight and tolerances for hot-rolled wire rods
GB/T14981-1994热轧盘条尺寸、外形、重量及允许偏差
13.
Beams and columns and purlines deviation should be allowed to meet the norms.
梁、、条的安装的允许偏差应符合规范的规定。
14.
" Dimensions, shape, weight and tolerances for hot-rolled L-sectional steel"
GB/T9946-1988热轧L型钢尺寸、外形、重量及允许偏差
15.
A discussion for defines bounds of allowable deviation of construction works in site;
关于确定施工过程允许偏差范围的讨论
16.
" Dimensions,shape and tolerances for cold-rolled steel strips with a width less than 600mm"
GB/T15391-1994宽度小于600mm冷轧钢带的尺寸、外形及允许偏差
17.
" Forged round and square steels--Dimension, shape, weight and tolerance"
GB/T908-1987锻制圆钢和方钢尺寸、外形、重量及允许偏差
18.
" Dimensions, shape, weight and tolerances for cold-rolled plates and sheets"
GB/T708-1988冷轧钢板和钢带的尺寸、外形、重量及允许偏差