1.
Numerical Simulation and Process Research on Incremental Cold Rolling for Spline Tube with Two Rollers
花键管增量式两轮冷滚轧工艺及数值模拟
2.
Experiment Study on the Techniques of the Cold Rolling Steel Matrix Composites;
冷轧钢基复合材料轧制工艺实验研究
3.
Discussion on Blooming Process for Cold Rolling Oriented Silicon Steel CGG- 1
冷轧取向硅钢CGG-1初轧开坯工艺探讨
4.
The Improvement on Roller Forced Cooling Systerm of Meishan 1422 Hot Strip Mill
梅钢1422热轧轧辊强制冷却工艺优化
5.
The Continuous Annealing Process for Cold-rolled Non-oriented Electrical Steel
冷轧无取向电工钢连续退火工艺研究
6.
Key Procedures in Cast-rolling Cupronickel Condenser
白铜冷凝管铸轧工艺关键工序的研究
7.
CAPP System for Cold Process Technology of Rolling Bearings
滚动轴承冷加工工艺CAPP系统的设计
8.
The Study of Processing Craft of Tension-assisted Cold Rolling and Simulation;
冷拉伸滚压加工工艺研究及数值仿真
9.
THE APPLICATION OF CONTROLLED-COOLING TECHNOLOGY FOR REINFORCED BAR TO CONTINUOUS ROLLING PROCESS
钢筋轧后控制冷却工艺在连轧机组的应用
10.
Researching the Technics of Pickling-CC Rolling & the Optimization Design of Rolling Regulation;
酸洗—冷连轧生产工艺的研究及轧制规程的优化
11.
Study on Effects of Cold Rolling-Process on Microstructure and Properties of Nb+Ti- Interstitial Free Steel;
Nb+Ti-IF钢薄板冷轧工艺及组织性能研究
12.
Research on Technics Controlling Roll and Cooling of 70# Excellent Carbon Steel Dish Winding;
70#优碳钢盘圆控轧控冷工艺的研究
13.
Technical Study of High Precise Sixteen-roll Cold Rolled Strip Production;
十六辊高精度冷轧带钢生产工艺研究
14.
Research on Controlled Rolling and Controlled Cooling of the C-Mn Super-fine Grain Steel;
C-Mn超细晶钢控轧控冷工艺的研究
15.
Improvement on the High Speed-wires Equipment and Process of Controlling Rolling and Refrigeration in Certain Factory;
某厂高线控轧控冷设备与工艺的改进
16.
The Development of Cold Rolling Process for Fine Grain High-strength IF Steel;
细晶高强IF钢冷轧生产工艺的开发
17.
Research on Annealing Technology and Microstructure and Property of Drawable Cold Sheets
冷轧深冲板退火工艺和组织性能研究
18.
The Cold Steel Plate Ridging Analysis and Process Improvement of SUS444
SUS444不锈钢冷轧板板纹分析及工艺改进