1.
Effect of Superheat Treatment on Solidification Structure of ZL114A Alloy
熔体超温处理对ZL114A凝固组织的影响
2.
Microstructure Evolution of DZ125 Superalloy Directionally Solidified with Melt Superheating Treatment
DZ125高温合金熔体超温处理定向凝固组织的演化规律
3.
Effect of silicon solute contents on solidification structure of aluminum alloy ingots by ultrasonic treatment under melt holding
熔体保温条件下溶质Si含量对超声波处理铝合金凝固组织的影响
4.
Ultrasonic Melt Treatment and Solidification of 7055 Aluminum Alloy;
7055铝合金熔体超声处理与凝固研究
5.
The Effect of Melt Temperature Treatment on Solidification Microstructure and Capability of ZL114A Alloy;
熔体温度处理对ZL114A合金组织及其性能的影响
6.
Study on Preparation of AlSi7Mg Alloy Semi-solid Billets by Melt Isothermal Treatment Process;
熔体等温处理法制备AlSi7Mg合金半固态坯料的研究
7.
The Melt Temperature Treatment of Al-Si Alloy and Its Solidification Process;
Al-Si系合金的熔体温度处理及其凝固过程研究
8.
Heat treatment of aluminum coating electrodeposited on ferritic stainless steel at room temperature molten salts
铁素体不锈钢室温熔盐镀铝层的热处理
9.
Research and Development of High Temperature Smelting Metal Measurement System Based on Wavelet Analyse;
基于小波图像处理技术的高温熔体测温系统的研究与开发
10.
Influencing Factors in Molten Aluminum Treating by Elec-flux Process
电熔剂法净化处理铝熔体的影响因素
11.
The Effect of the Melt Thermal Treatment with Composition Compensation on the Microstructure of the Primary Silicon of the Silumin
成分互补熔体温度处理对高硅铝合金的初生硅相组织的影响
12.
Effect of Melt Ultrasonic Field Treatment on segregation and property of Al-Pb Alloy Ingots
熔体超声场处理对Al-Pb合金铸锭偏析及性能的影响
13.
Effect of Melt Ultrasonic Treatment on Microstructure and Mechanical Properties of As-cast A356 Alloy
熔体超声处理对A356合金铸态显微组织和力学性能的影响
14.
Effect of Melt Ultrasonic Treatment on As-cast Microstructure and Component Segregation of 7050 Aluminium Alloy
熔体超声处理对7050铝合金铸态组织及成分偏析的影响
15.
Calcination and Phase Composition of BSCCO High Temperature Superconducting Powder
铋系高温超导粉体的处理与相组成的控制
16.
The Melting Transition and Voltage Noise of Vortex Lattice in Hign Temperature Superconductors;
高温超导体磁通格子的熔化相变和噪声研究
17.
Studies on Ultra-High-Temperature Drilling Fluid System (1): Design Ultra-High-Temperature Drilling Fluid Additives
超高温钻井液体系研究(Ⅰ)——抗高温钻井液处理剂设计思路
18.
Influence of acid pickling on electrodeposition of aluminum on magnesium alloy in room temperature molten salts
酸浸蚀处理对AZ91D镁合金室温熔盐镀铝的影响