1.
Fracture Analysis of Gear Driven LP Rotor in ZR750 Compressor Low-pressure Nose
空压机ZR750低压机头LP转子驱动齿轮断裂分析
2.
Analysis on Early Fracture of 20CrMo Steel Gear Shaft
20CrMo钢齿轮轴早期断裂分析
3.
Replace cracked case; examine gears and bearings for possible damagAvoid excessive weight on vehicle.
更换断裂的差速箱；检查齿轮和轴承是否损坏。避免车辆过载。
4.
Fracture Failure Analysis of Heavy Metallurgic Casting Lifting Reducer Gear Shaft
大型冶金铸造吊主起升减速机齿轮轴断裂失效分析
5.
Vibration analysis and diagnosis on gear failure of gear box
齿轮箱中齿轮故障的振动分析与诊断
6.
Improperly meshed or worn gear wheels, gear wheel brackets broken or improperly secured.
齿轮啮合不好或破损，齿轮支架破裂或不牢固。
7.
Tooth fracture failure analysis of carburized 20CrMnTi steel gear
20CrMnTi钢渗碳齿轮断齿失效分析
8.
Gear Pitting Corrosion Fault Diagnosis in Gearbox Based on Wavelet Analysis;
基于小波分析的齿轮箱齿轮点蚀故障诊断
9.
Replace cracked casAfter inspecting for other possible causes, examine gears and bearings for possible damagAvoid erratic use of clutch.
更换断裂的差速箱。检视过其他可能原因后，检查齿轮和轴承是否损坏。避免不适当的使用离合器。
10.
straight-cut gear
直齿圆柱齿轮，正齿齿轮
11.
Effect of friction coefficient on stress field intensity of gear crack
摩擦系数对齿轮裂纹应力场强的影响
12.
Reasons of Cracks During Grinding and Preventive Measures
齿轮磨削裂纹的产生原因及防止措施
13.
Influence of the Harmonic Gear Drive Torsion Stiffness on Crack
裂纹对谐波齿轮传动扭转刚度的影响
14.
burnishing of gear teeth
(齿轮的) 轮齿研磨
15.
Hoist Gear Reducer and Gear Torn off Analysis and Countermeasures
提升机减速器断齿及齿圈撕裂的分析与对策
16.
Site Welding Repair of Gear Cast Iron Gray for Shears
剪板机灰口铸铁齿轮断齿现场焊接修复
17.
The lawn mower finally broke; The gears wore out; The old chair finally fell apart completely.
割草机终于破裂了；齿轮破裂了；这把旧椅子完全破裂了。
18.
spur and helical hobbing machine
正齿轮和斜齿轮滚齿机