1.
TECHNOLOGY SCHEME OF SMELTING AND CASTING OF 600 THOUSANDS TONS OF STAINLESS STEEL
唐山不锈钢60万t不锈钢冶炼连铸工艺方案的确定
2.
Microstructural properties and leaching behavior of the stainless steel EAF slag
不锈钢冶炼电炉渣结构性质及浸出行为研究
3.
Study on the Direct Recycling of Stainless Steelmaking Dust;
不锈钢冶炼粉尘形成机理及直接回收基础理论和工艺研究
4.
Practice of Making Briquette from Stainless Steel Dust with 30 Tons Electric Arc Furnace
30t电炉冶炼不锈钢除尘红泥球的实践
5.
The Control of Decarburization and Denitrogenization VOD Process in Smelting of Ferritic Stainless Steel
VOD法冶炼铁素体不锈钢的碳氮控制
6.
Practice on Smelting Ultra Purity Stainless Steels with VOD in TISCO
太钢VOD冶炼超纯铁素体不锈钢的工艺进步
7.
Process Technology Development of Smelting Ultra Purity Ferritic Stainless Steels With VOD in TISCO
太钢VOD冶炼超纯铁素体不锈钢的工艺技术进步
8.
Theory and Process Research on Producing Stainless Steel Master Alloys in a Shaft Furnace;
竖炉法冶炼不锈钢母液的理论及工艺研究
9.
A Plan and Research on Melt Stainlss Steel with Duplex-melting Process of Submerged Arc Furnace and Argon Oxygen Decarburizing Furnace
矿热炉与AOD炉双联法冶炼不锈钢的设计与研究
10.
Study on Smelting Process of S32750 Super Duplex Stainless Steel
超级双相不锈钢S32750板材的冶炼工艺研究
11.
The product can be used a nickel-alloy raw material for producing stainless steel, alloy steel and alloy cast iron.
产品可以作为镍合金原料用于冶炼不锈钢、合金钢和合金铸铁。
12.
A Kind of Steelmaking Process for Martensitic Stainless Steel Containing Mo and Ni Element From Scrap in Laboratory
实验室利用废钢冶炼含钼镍马氏体不锈钢的一种工艺
13.
An Aporoach to Melting Process of Stainless Steel with 0.2%￣0.4%S
含硫量0.2%～0.4%的不锈钢熔炼工艺
14.
OPPORTUNITIES AND CHALLENGES OF PM STAINLESS STEEL AUTOMOTIVE PARTS
粉末冶金不锈钢汽车零件的机遇与挑战
15.
The Study of Physical Metallurgical Models for Type 304 Stainless Steel in Hot Rolling;
304奥氏体不锈钢热轧过程物理冶金模型研究
16.
Study of Selection of Stainless Steel for Water Supply and Drainage Equipment of Metallurgic Industry
冶金行业供排水设备中合理选用不锈钢探索
17.
Influence of Sintering Parameters on Performance of Powder Metallurgy Cr13 Stainless Steel
烧结参数对粉末冶金Cr13型不锈钢性能的影响
18.
Analysis and Production of the Super-Low-Carbon Duplex Stainless Steel in Baosteel
宝钢超低碳双相不锈钢精炼分析与实践