1.
The ring teeth hob can realize high efficient radialfeedhobbing.
环纹滚刀可以实现高效率的径向进给滚齿加工。
2.
Refit the Lathe CW61200 to Have Radial Move Function
将CW61200改装成具有径向进给功能的端面车床
3.
The calculating method of the working orthogonal clearance of the flying cutting tool machin-ing worm wheel in radial feeding way is put forward, and a calculating example is given out.
文中提出了考虑径向进给速度时飞刀左右侧刃工作后角的计算方法,实际算例验证了其正确性。
4.
Forward Tool Path Modification for the Regulation of Cutting Engagement
对于切削进给的前向刀具路径修正研究
5.
tangential feed mechanism
切向进给[进刀]机构
6.
Improvement of RBF Neural Network Learning Algorithm
径向基函数神经网络学习算法的改进
7.
An Improved Prediction Model Based on Radial Basis Function Neural Network
改进的径向基函数神经网络预测模型
8.
The radial electron temperature and intensity of large|bore copper laser are presented.
给出了大口径铜蒸气激光器的径向电子温度及发光强度分布.
9.
The radial velocity and Doppler width distribution of belted atomic vapor are given.
给出原子束径向速度及其多普勒宽度分布。
10.
Increasing effective supply: a substantial approach to promoting economic growth;
增加有效供给是促进经济增长的实质性途径
11.
A blended feedrate planning algorithm for continuous tool path
连续加工路径的进给速度规划算法研究
12.
What he said is a lamp to my feet.
他的话给我指明了前进的方向。
13.
Automatic horizontal-feeding and rapid motion can be obtained by the slide carriage of the machine.
机床滑座能横向自动进给和快速移动。
14.
A feed screw extends from the base to the knee.
进给丝杠从底座伸向升降台。
15.
A Novel Algorithm to Judge the Feed Direction based on the Line Interpolation Principle
基于直线插补的进给方向判断新算法
16.
Dendritic cell targeting delivery systems:research advances
树突状细胞靶向给药系统的研究进展
17.
the radial linear advection may transfer the vorticity of the outer region towards the center of the typhoon.
沿径向线性平流的引进可使外区涡量向台风中心方向传播。
18.
Using matrix theory, we present a sharp upper bound on the spectral radius of digraphs and strongly connected diagraphs.
利用矩阵理论，给出了简单有向图的谱半径可达上界和强连通有向图的谱半径上界。