1.
A Study on the Forming Process and Equipment of Continuous Microcellular Foaming which Using a Novel Composite by Intercalation as Foaming Agent;
基于插层发泡剂的挤出发泡工艺及装置的研究
2.
Powder Metallurgy-Foaming Process of Rolled Precursor for Aluminum Foam Sandwich
泡沫铝夹心板轧制预制坯的粉末冶金发泡工艺
3.
Investigation the Extrusion Foaming Process of Polyproylene by Using Supercritical CO_2 as Foaming Agent;
超临界CO_2/PP挤出发泡工艺研究
4.
Effect of Injection Processing on PP/Mica Powder Foaming Behavior
注塑工艺对微发泡PP/云母粉发泡行为影响
5.
Research on the Effect of Process Parameters of Microcellular Foam Injection Moulding on Cell Configuration
微细发泡注塑成型工艺对泡核形态影响的研究
6.
Preparation and properties of Ni-coated TiH_2 foaming agent used in foamed aluminum production
泡沫铝用Ni/TiH_2包覆型发泡剂的制备工艺及性能
7.
Preparation of aluminum foam by composite-carbonate foaming agent
复合碳酸盐作发泡剂制备泡沫铝的工艺研究
8.
foamed impregnation
发泡浸渍法（粘合法非织造织物工艺）
9.
Study on the Technology of the PVC foamed Wall Paper and its Rheological Behavior
聚氯乙烯发泡壁纸工艺与流变行为的研究
10.
Study on Mold-filling Flow and Technique of Microcelluar Foam Injection Molding;
微孔发泡注射成型充模流动及工艺研究
11.
Study on Processing of Microcellular Foam Polystyrene by Twin-screw Extrusion;
聚苯乙烯的双螺杆挤出微孔发泡成型工艺研究
12.
Study on the Preparation Process of the Rigid Low-Foamed Surface Crusting PVC;
硬质低发泡结皮PVC板材制备工艺的研究
13.
The Tandom Extrusion Device and Process Investigation of Polyproylene Foaming by Technology of Supercritical Fluid;
超临界流体PP发泡双阶挤出工艺与设备的研究
14.
Research on the technology of getting sodium sulfite from the by-product of AC fomaing agents;
用AC发泡剂副产物制取亚硫酸钠的工艺研究
15.
Research on Key Technologies of Microcellular Foam Injection Moulding Process
微细发泡注塑成型工艺的关键技术研究
16.
Study on the Preparation Technology and Application of Natural Rubber Foam Composites
天然橡胶发泡复合材料的制备工艺与应用研究
17.
Optimization of the Technology for Fermentation of Pickle under Decompression by Response Surface Method
响应面法优化减压处理下泡菜发酵工艺参数
18.
A clean process of recovering chlorination mother liquor generated in ADC foaming agent production
ADC发泡剂生产中氯化母液的清洁回收工艺