说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 超高压烧结
1.
Characteristic Comparison of α-Si_3N_4 and γ-Si_3N_4 Sintered under Ultra-high Pressure
α-Si_3N_4与γ-Si_3N_4超高压烧结体的性能对比
2.
FABRICATION OF SiC CERAMIC BY ULTRA-HIGH PRESSURE TECHNIQUE
纳米SiC陶瓷的超高压烧结研究(英文)
3.
Sintering at high pressure and high temperature and characterization of nanometer B_6O-B_4C superhard composite
纳米B_6O-B_4C超硬复合材料的高温高压烧结与表征
4.
Sintering, Structure and Properties of Nanosized ZnO under Ambient and Ultra-High Pressure;
纳米氧化锌常压/超高压下的烧结及其结构与性能
5.
High Pressure and High Temperature Sintering of Nanostructured B_6O-B_4C Superhard Composite;
纳米结构B_6O-B_4C超硬复合材料的高温高压烧结、表征与应用
6.
ULTRA-HIGH PRESSURE SINTER NANO-SiC CERAMIC
无烧结助剂SiC陶瓷的高压烧结研究
7.
Study on the Sintering of cBN-AlN Composites at the HPHT;
cBN-AlN的高温高压烧结研究
8.
Fabrication of High Nb Containing TiAl Alloys by High-Energy Ball Milling and Pressureless Sintering
高能球磨与无压烧结制备高铌TiAl合金
9.
Optimized design on a new type thermal structure of scramjet combustor
超燃冲压发动机燃烧室新型热结构的优化设计
10.
Experimental Studies of Combustion on New 670t/h Ultra-high Pressure Coal-water Slurry Boiler;
新建670t/h超高压水煤浆锅炉的燃烧试验研究
11.
New Ultra-high Permittivity High Frequency Heat-Stable Medium-Temperature Sintering Ceramic Material;
新型超高介高频热稳定中温烧结瓷料研究
12.
The Effect of the High Pressure Sintering Process on the Microstructure and Thermoelectric Properties of CoSb_3;
高压烧结过程对CoSb_3微观结构及热电性能的影响
13.
Preparation of High-purity High-density Alumina Ceramics with Low Temperature Sintering;
高纯高致密氧化铝陶瓷低温常压烧结研究
14.
Control of the Partial Oxygen Pressure of Sintering of High Frequency High B_s Mn-Zn Power Ferrites
高频高B_s MnZn功率铁氧体烧结氧分压控制
15.
The experimental results of low temperature ablator (beeswax and camphor) tests in the hypersonic wind Tunnel are presented in this paper.
本文给出了低温烧蚀材料的高超声速风洞烧蚀实验研究的结果。
16.
EXPERIMENT INVESTIGATION ON INFLUENCE OF SUPERHIGH BASICITY ON SINTER PROPERTIES
超高碱度对烧结矿性能影响的试验研究
17.
Influence of Superhigh Basicity on Sinter Properties and Sintering Parameters
超高碱度对烧结矿性能与工艺参数的影响
18.
, sintering is one of the critical steps in developing the applications of engineering ceramics In this paper, some normal sintering processes are outlined, while the plasma sintering and high pressure self-combustion sintering methods are highlighted.
本文在简单列举了几种普通烧结方法的同时,着重叙述了等离子烧结法和高压自燃烧结法。