1.
Coupling Researches on Tribological and Dynamical Behaviors of the Crankshaft-Bearing System of Internal Combustion Engines;
内燃机曲轴-轴承系统摩擦学动力学耦合研究
2.
Thermal Characteristics of the Spindle-bearing System of Small Size Mill Center
小型铣削中心主轴-轴承系统的热态特性分析
3.
Coupling Analysis of Dynamics Tribology and Elastic Mechanics for a Crankshaft Bearing System
计入曲轴倾斜时曲轴-轴承系统动力学摩擦学和弹性力学耦合分析
4.
Modeling for Rotor System of AC Magnetic Bearing Electric Spindle;
交流磁轴承支承电主轴转子系统建模
5.
The Monitoring System of Orbit of Shaft Center of Active Magnetic Bearing Based on LabVIEW
基于LabVIEW的磁力轴承轴心轨迹监测系统
6.
Emulation and Caculation of Hydroelectric Generation Set Shafting Base on Rotor Bearing System;
基于转子轴承系统的水轮机主轴系统仿真计算
7.
Dynamic Behavior of a shaft-rolling bearing system with clearance
计入轴承间隙时轴-滚动轴承系统动力学行为研究
8.
Precise determination of windings axes angle and model stiffness coefficients for bearingless motors
无轴承电机绕组轴线及控制系统刚度系数测定
9.
Coupling Research on Tribology, Stiffness and Strength of Crankshaft-bearing System;
曲轴—轴承系统摩擦学、刚度和强度的耦合研究
10.
Study on the Static and Dynamic Characteristics Analysis and CAD of the High Speed Bearing-Spindle System;
高速轴承—主轴系统静动态性能分析及其CAD研究
11.
Research on the H_∞ Control System in the Radial-Axial Magnetic Bearing Biased with Permanent Magnets;
永磁偏置径向轴向磁轴承H_∞控制系统的研究
12.
Design and Realization of Control System for the Radial-Axial Direction Magnetic Bearing of Permanent Magnet;
永磁偏置径向-轴向磁轴承控制系统设计与实现
13.
Influences of spline coupling on stability of rotor-bearing system
花键联轴器对转子-轴承系统稳定性影响研究
14.
Study on the System Simulation of the Bearingless Induction Motor & Control of Axial Magnetic Bearing;
无轴承异步电动机系统仿真及轴向磁轴控制研究
15.
Design and Dynamic Analysis for Multi-Support Rotor-Bearing System Bearing Load Identification Test-Bed;
多支承转子—轴承系统轴承负荷辨识试验台设计及其动力学分析
16.
Shaft Assembly (Male, female, washer, grease….
轴组件（轴，轴套，轴承，油脂。。。）
17.
Calculation for Stiffness of a High-Speed Roll Bearing and Dynamic Analysis of Rotor-Bearing System;
高速滚珠轴承的刚度计算与转子—轴承系统的动力学分析
18.
Construction of Mechanics Analysis System for Bearing of Roller Bit -Contact Stress Analysis of the Rollers;
牙轮钻头轴承力学分析系统的构筑——滚动轴承滚子接触应力分析