1.
Flow-induced vibration analysis for the secondary support assembly of reactor internal
堆内构件防断支承组件流致振动分析
2.
Fracture diagnosis and prevention of excavator slewing bearing high strength bolt
挖掘机回转支承螺栓断裂诊断与预防
3.
Research on fracture diagnosis and prevention of slewing bearing's high strength bolt
挖掘机回转支承螺栓断裂分析与预防
4.
Failure Analysis on the Break of Back-up Roller Body;
1700mm连轧机组支承辊辊身断裂失效分析
5.
The supporting case is the outer enclosure of the gyro component.
支承壳体是陀螺组件的外壳。
6.
Method Research on Fault Diagnosis of Interturn Short Circuit in Rotor Windings and Rotor Supporting Axles of Generator;
发电机转子绕组匝间短路及转子支承轴系故障诊断方法的研究
7.
A Mechanism Research on the Fracture Failure of Cement Concrete Pavement Slabs under Different Supporting Conditions
不同支承条件下水泥混凝土路面板的断裂破坏机理研究
8.
The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.
耳轴组件的支承是每根臂末端的空气轴承，轴承上的闸瓦起定位作用。
9.
specimen-holder assembly
样品（支持）器组件
10.
This equipment is made up of kiln body, support device, supporting device with shelf, moving kiln head, sealing device for kiln tail, burning device and etc. parts.
该设备由筒体、承装置、档输支承装置、动装置、动窑头、尾密封装置、烧装置等部件组成。
11.
Trimmings such as zips and stay tapes are included to prevent any interruption during assembly.
在组装过程中,要备好拉链、定位带与附件,用来防止工序中断。
12.
The grease lubricated bearing assemblies are built with special heat resistant seals on the roll sides to prevent leakage and to ensure a long bearing life at high temperature.
油脂润滑的轴承组件，经过特殊的防热密封设计，可防止泄露并保证高热环境下的高使用寿命。
13.
Loan Scheme Supporting Team [Fire Services Department]
贷款计划支援组〔消防处〕
14.
divided conductor protectio
绕组支路断线保护装置
15.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
16.
Shaft Assembly (Male, female, washer, grease….
轴组件（轴，轴套，轴承，油脂。。。）
17.
Causes and preventive measures for soledering cracks on bearing surface of adapter
承载鞍支承面焊补裂纹的形成原因及防止措施
18.
The Research of the Relationship between Perceived Organizational Support and Organizational Commitment;
组织支持感受与组织承诺的关系研究