1.
Correlation Study on Strength Parameters of Slide Surface Silty Clay of Landslide in Chongqing Reservoir Area
重庆库区滑带粉质黏土强度参数相关性研究
2.
Experiment Study of Shear Strength Parameter of Unsaturated Soil by Triaxial Test and Numerical Simulation of Excavation;
非饱和土强度参数的三轴试验研究与基坑开挖的数值模拟
3.
DOUBLE PARAMETER MODEL PREDICTING STRENGTH OF CONCRETE WITH FLY ASH
预测粉煤灰混凝土强度的双参数模型
4.
Estimating the strength of high performance concrete using acoustic parameters
声参数的高性能混凝土强度推定模型
5.
Analysis of Effect of Strength Parameters on Reliability Index of Soil Slope Stability
强度参数对土坡稳定可靠度指标的影响分析
6.
Test parameters were load eccentricity ratio and material parameters( steel ratio, strength of concrete and confinement index).
试验参数包括偏心率和材料参数(钢率、凝土强度和套箍系数).
7.
The analysis and determination of shear strength of Jinle landslide slip zone
金乐滑坡滑带土抗剪强度参数分析与确定
8.
Discussion on the Influence of Matric Suction of Unsaturated Soil on Shear Strength Parameters
非饱和土基质吸力对抗剪强度参数影响的探讨
9.
Research on the preparation factor influencing the compressive strength of alkali activated slag cement concrete
配制参数对碱矿渣混凝土强度影响研究
10.
Regularity of relation between structural parameter and strength indexes of unsaturated loess
非饱和黄土结构性参数与其强度指标关系初探
11.
Constitutive relation of concrete three-parameter unified strength in non-uniform hardening plasticity models;
非均匀强化塑性模型中混凝土的三参数统一强度本构关系
12.
Comparison and Analysis of the Shear Strength Parameters Test about Red Clay of Passenger Transport Line from Wuhan to Guangzhou
武广客运专线红黏土抗剪强度参数试验对比和分析
13.
Mechanism Study of the Soil Shearing Strength Under the Changing of Environmental Factors in Geermu Region;
环境因素变化对格尔木地区盐渍土抗剪强度参数的影响研究
14.
A new inversion method of rock-soils parameters based on complex-variable-differentiation method
一种基于复变量求导法的岩土体抗剪强度参数反演新方法
15.
STRENGTH OF DISTURBED CLAY IN SLIDING ZONE OF CIGU LANDSLIDE AND ASSOCIATED STABILITY ANALYSIS
茨菇滑坡滑带土扰动样强度参数取值分析及滑坡稳定性评价
16.
In the end, the referential values of the strength parameters of the water immersed SRM in test area were given.
最后，对试验区土石混合体在浸水下的强度参数提出了合理的参考值。
17.
Hardening function of two-parameter twin shear unified failure criterion
双剪双参数强度准则硬化函数的探讨
18.
Effect of processing parameters on strength and toughness of high-strength steel
工艺参数对高强度钢强度及韧性的影响