1.
The Analysis of Pile-Soil-Structure Dynamical Interaction Based on Plastic Hinge Theory;
基于塑性铰理论的桩—土—结构动力相互作用分析
2.
Solution Method for Anti-blast Ability of the Wall Based on Yield Line Theory
利用塑性铰线理论求解墙体抗爆能力
3.
In-Plane Nonlinear Theory and Elastic-Plastic Stability of Pined Circular Arches;
两铰圆弧拱非线性弯曲理论和弹塑性稳定
4.
After the inelastic phase, the distributing of plastic hinges is proper and reasonable, and the requirement of ductility design of structure is satisfied.
进入塑性阶段后，塑性铰分布合理，满足了结构延性设计的要求。
5.
Experimental Research and Theoretic Analysis on the Relations of Plastic Hinges and Reinforced Concrete Eccentric Beam-column Joints Connecting Spread-ended Beams;
钢筋混凝土偏心节点梁端水平加腋与塑性铰关系试验研究及理论分析
6.
Mechanism of Plastic Hinge and Non-linear Analysis of Prestressed Subassemblage Concrete Frame
预压装配式预应力混凝土结构框架塑性铰机理研究及非线性分析
7.
The plastic elemental stiffness matrix was derived by plastic-hinge method.
然后用塑性铰法推导了单元的塑性刚度矩阵。
8.
Yield-line Theory Application and Studying of Thin Plate Curve Problem;
薄板弯曲问题的塑性铰线法应用研究
9.
It is shown that the secondary moment can facilitate the moment redistribution when the rotational capacity of plastic hinge is not enough.
从理论上证明了预应力次弯矩在塑性铰转动能力不够时能提高连续梁弯矩调幅能力的这一观点。
10.
The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet
摆辗镦粗工艺过程中塑性铰形成与特性研究
11.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
12.
Shear Capacity of Plastic Hinge Region of RC Shear Wall;
钢筋混凝土剪力墙塑性铰区受剪承载力分析
13.
Quasi-Static Cyclic Tests and Plastic Hinge Analysis of RC Structural Walls
钢筋混凝土墙准静力循环试验和塑性铰分析
14.
Basic Theoretics and System Development on Wide Range Parallel Six-Component Force Sensor with Flexible Joints
大量程柔性铰并联六维力传感器基础理论与系统研制
15.
Research on Plastic and Damage Behavior of Sheet Metal by Using Crystalline Plasticity
基于晶体塑性理论的板材塑性及损伤行为研究
16.
On Second Stage Minimization Variational Principle in Plasticity
塑性理论中的二阶段最小变分原理
17.
Study on Seismic Behavior of Beam-column Joint with Beam-end Steel Fiber Concrete Plastic Hinge;
梁端钢纤维混凝土塑性铰梁柱节点抗震性能研究
18.
EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF RC COLUMN WITH RUBBER LAYER BUILT IN ITS PLASTIC HINGE
塑性铰区埋入高阻尼隔震橡胶后RC柱抗震性能的试验研究