1.
Research on Load for FEM Simulation Technology and Application in the Development Low-voltage Circuit Breaker;
有限元仿真分析中载荷施加技术及其在低压断路器开发中的应用
2.
The emission observed while holding at the proof load provides another piece of information regarding the imminence of failure.
在验证载荷施加期间，检测声发射还能额外地提供有关破坏临近程度的信息。
3.
The external forces include reactions (R)as well as applied loads(P).
外力包括反力R和施加力荷载P。
4.
Research on application methods of dynamic loads of hydropower house
水电站厂房机组动荷载施加方式研究
5.
The simplest imposed conditions are those in which the loading is periodically and uniformly repeated.
最简单的加载情况是周期地、均匀而重复地施加的载荷。
6.
Analysis and calculation of superimposed load induced by double parallel shield tunnelling
双线平行盾构法隧道施工附加荷载的计算分析
7.
Dead weight loading simulating that of the bolts was applied at the bolt holes through the agency of steel balls and buttons.
螺栓荷载是用死荷重来模拟的，以钢球和压钮作为代用件，通过它们将此荷载施加于螺栓孔。
8.
The load was applied and held constant by a screw-type machine to insure that the displacement printout could be paired with a known load.
载荷用螺旋式机械施加并保持不变，以保证打印出的位移能够和已知载荷相适应。
9.
Loads are commonly applied with universal testing machines, hydraulic cylinders dead weights, or some form of pressure.
通常是用万能试验机、液压缸重物或某种形式的压力施加载荷。
10.
These loads are normally applied by hydraulic jacks acting directly at the point of application of the force.
通常这些荷载是用液压千斤顶直接施加于力的作用。
11.
Less frequently we apply the load directly to the surface by means of hydraulic jacks and distribution plates.
用液压千斤顶与分布板直接施加荷载于表面的方法较不常用。
12.
The pivot and race surfaces were true surface of revolution and were correctly centred when no load was applied.
轴枢和套圈的表面是准确的旋转表面，并在未施加载荷正确对中。
13.
At this point it was necessary to evaluate the normal pattern of loading to be applied to the model for different angles of incidence of the wind.
这里，必须评定在风的不同入射角时施加于模型的荷载的正常型态。
14.
At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.
在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。
15.
Design and Realization of the Analog Loading System for the Fluctuating Load;
动态载荷模拟加载系统的设计与实现
16.
Application method for complex loads with ANSYS APDL
基于ANSYS APDL的复杂载荷加载法
17.
Analysis on the circumscription of the heavy camion and its limited loading
重型载重车辆加载安全区域与极限载荷分析
18.
Reverse Construction Technology of Deep and Circular Well Under Asymmetry Load
非对称荷载下深圆井逆作法施工技术