1.
Four-node quadrilateral element formation for laminated composite plates based on 1,2-3 higher-order shear deformation theory
基于1,2-3高阶剪切变形理论的四边形层合板单元列式
2.
Forced Vibration Analysis of Antisymmetric Laminated Rectangular Plates with Distributed Patch Mass Using Third Order Shear Deformation Theory
运用第三阶剪切变形理论对具有部分分布质量的反对称层合矩形板进行强迫振动分析
3.
Natural Frequencies of Generally Laminated Composite Plates Using the Gaussian Radial Basis Function and First-Order Shear Deformation Theory
采用高斯径向基函数和一阶剪切变形理论分析普通复合材料叠合板的固有频率
4.
A simple higher-order shear deformation theory for laminated composite plates isdeveloped.
本文提出了一种简单高阶剪切变形层板理论。
5.
A Theory of Stability for Frames and Mega-Frames Considering the Effects of Shear Deformations
考虑剪切变形影响的框架及巨型框架稳定理论
6.
Dislocation theory can be used to describe the shear deformation mechanism of wet and soft soils.
可借助位错理论的某些方法来阐述湿软土壤的剪切变形机理。
7.
Numerical analysis for shear strength and deformation characteristic of joint plane with complicated surface
复杂节理面剪切强度和变形特征的数值分析
8.
Research on the Prediction for Shear Yield Stress of Electrorheological Fluids;
电流变液剪切屈服应力预测的理论研究
9.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
10.
Influence of Shear Lag and Shear Deformation on the Vibration of Thin-Wall Box-Girder
剪力滞后剪切变形对薄壁箱梁的振动影响
11.
Research on the Mechanism of Roof-floor Shearing Deformation and Breakage in No.1 Coal Mine of Shi Zuishan Deep Weak Rock Roadway;
石嘴山一矿深部软岩巷道顶底板剪切变形破坏机理研究
12.
The shearing strain is essentially inhomogeneous flow of metal.
剪切变形的实质是金属的不均匀流动。
13.
Rectangle blade with four functional cutting edges is very durable.
◆ 剪切角可调，减少板料扭曲变形。
14.
Without loss of generality, shear deformations will be neglected.
不失一般性，忽略不计剪切变形。
15.
Analysis for Deformation and Shear Zones of Reinforced Embankment;
加筋路堤变形特性和剪切屈服区分析
16.
Analysis of Shear Deflection of Flat Steel Box Girder of Cable-Stayed Bridge;
斜拉桥扁平钢箱梁剪切变形效应分析
17.
Analysis in Structural Deformation of Bingdaban Ductile Shear Zone in Tianshan of Xinjing;
新疆冰达坂韧性剪切带构造变形分析
18.
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程