1.
high vacuum superinsulation cryogenic container
高真空超绝热低温容器
2.
Test methods for leak rate of cryogenic containers
GB/T16775-1997低温容器漏气速率测定方法
3.
Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;
应变强化奥氏体不锈钢低温容器研究
4.
Loss of Vacuum Experiment on a Multi-Layer Insulation Vessel;
高真空多层绝热低温容器真空丧失试验研究
5.
Manufacture and Performance of Uhmwpe Cryogenic Container
超高分子量聚乙烯低温容器的制备与性能研究
6.
For this reason pressurized cryogenic containers are normally protected with multiple devices for over-pressure prevention.
由于这个原因，一般用多种装置来保护受压低温容器，以防止过压。
7.
Cryogenic vessels retained by customers should be periodically tested to confirm that the contents comply with Pharmacopoeial requirements.
用户保留的低温容器应定期检验，以确定其成份符合药典要求。
8.
A container is a cryogenic vessel, a tank, a tanker, a cylinder, a cylinder bundle or any other package that is in direct contact with the medicinal gas.
容器是指低温容器，储罐、罐车、瓶、瓶包或其他直接接触医用气体的包装物品。
9.
Low alloy steel plates for low temperature pressure vessels
GB3531-1996低温压力容器用低合金钢钢板
10.
Technical regulation for steel low temperature pressure vessels
钢制低温压力容器技术规定
11.
A Low-Power Consumption, Lower Temperature Drift,Digital Capacitive Angular Displacement Transducer
低功耗低温漂数字式电容角位移传感器
12.
The types of containers in use include the dewar, cryogenic liquid cylinder, and cryogenic storage tank.
使用中的容器类型包括杜瓦瓶、低温液体钢瓶和低温储存罐。
13.
An exploratory investigation on sandwich vacuum of a cryogenic liquid storage vessel in use
关于在用低温液体贮运容器夹层真空度的探讨
14.
variable temperature cryostat
可变温度低温恒温器
15.
Liquid nitrogen container on high temperature superconducting maglev which fits to evacuated tube transportation
适用于真空管道交通的高温超导磁悬浮车低温液氮容器
16.
A cryogenic liquid cannot be indefinitely maintained as a liquid even in well-insulated containers.
即使在隔热良好的容器内，低温液体不能无限地维持在液态。
17.
Studies on Low Cycle Fatigue Behavior and Life Evaluation Technique for Special Pressure Vessel Steel 2.25CrlMo at Elevated Temperature;
特种压力容器用钢2.25Cr1Mo的中温低周疲劳行为及寿命评估技术的研究
18.
Computer Aided System of Low-temperature Pressure Vessel Welding Procedures Design;
低温压力容器计算机辅助焊接工艺设计系统的开发与研究