1.
K157 Engine Intake Process CFD Numerical Simulation Calculation;
K157发动机进气过程CFD数值模拟计算
2.
Large Eddy Simulation of Turbulence Characteristic Through Intake Process of Internal Combustion Engines;
内燃机进气过程缸内湍流流动特性的大涡模拟
3.
Research on In-Cylinder Flow of Intake Process for WD615.67A Diesel Engine with CATIA
基于CATIA的WD615.67A柴油机进气过程缸内流动研究
4.
organism take in oxygen
生物体吸进氧气的过程
5.
This action could open an inlet valve for an intake stroke, or open an exhaust valve for an exhaust stroke.
这过程能使进气门在进气行程打开，或者排气门在排气行程打开。
6.
To require air in the combustion process.Used of an internal - combustion engine.
进气氧化过程中需要空气。用于内燃机
7.
To draw in(air)for the combustion process.Used of an internal - combustion engine.
进气燃烧过程中吸入空气。用于内燃机
8.
"On the intake stroke, the intake valve has opened, the piston is moving downward, and a mixture of air and vaporized gasoline is entering the cylinder through the valve port."
"在进气行程中,进气门打开,活塞向下移动,可燃混合气通过进气门进入气缸。"
9.
Intake Temperature Influencing Alcohol HCCI Combustion
进气温度对乙醇均质压燃过程的影响
10.
The Research on the Gas Phase Process of Electron-Assisted Chemical Vapor Deposition from CH_4/H_2 Mixture Gas;
CH_4/H_2系统电子助进化学气相沉积气相过程研究
11.
"A fresh air-fuel charge enters through the intake port, and the Burned gases exit through the exhaust port. The complete cycle of operation is as follows."
新的可燃混合气通过进气口进入,燃烧过的废气从排气口排出．整个工作过程如下:
12.
Visualization of Air-Natural Gas Mixing Process in the Intake Manifold for Natural Gas Engine;
天然气发动机进气管内混合气形成过程的可视化研究
13.
To inhale and exhale(air, for example)during respiration.
呼吸在呼吸过程中吸进和呼出（例如空气）
14.
The Deformation of An Intake Manifold Foam Pattern during Vibration Moulding Process for EPC
进气管铸件消失模振动造型过程中模样的变形
15.
Multi-Dimensional Simulation of Intake and Combustion Process in Gasoline Engine;
汽油机进气及燃烧过程的多维数值模拟研究
16.
Numerical Simulation on the In-cylinder Process of Different Inlet Structures of 135 Diesel Engine;
135柴油机不同进气结构的缸内过程数值模拟
17.
The Progresses on Land Surface Processes and Atmospheric Boundary Layer in Arid Regions
干旱区陆面过程和大气边界层研究进展
18.
Research progress of fine porous diffusor in gas-liquid mass transfer
微孔扩散器在气液传质过程中的研究进展