说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 锚固件
1.
The components of a suspension bridge are: flexible cables, towers, anchorages, suspenders, deck and stiffening trusses.
悬索桥有下列构件:柔性索缆、索塔、锚固件、吊杆、桥面、加劲桁架。
2.
Full-scale experiment on anchoring capability of large tonnage prestressing tendon-anchorage assembly
大吨位预应力锚具组装件锚固性能足尺试验
3.
Finite element analysis on the anchor end enhancement processing of CFRP reinforcement member
CFRP加固构件锚固端加强处理的有限元分析
4.
Fatigue anchor property of compound body from unbonded prestressed tendons and anchorage device under low temperature
无粘结预应力筋—锚具组装件在低温下的疲劳锚固性能
5.
Study on anchoring type and anchorage system of rock bolt
岩锚新的锚固方式及锚固体系的研究
6.
Recoverable Resin Bolt Anchoring Section Anchoring Characteristic Study
可回收树脂锚杆锚固段锚固特性研究
7.
Anchoring effect of pressure-type anchor rods on anchored section
压力型锚杆锚固段锚固效应特性分析
8.
explosively anchored
炸药爆破锚固锚杆法
9.
Experimental Study on the Tensile Capacity of Post-installed Rebar Specimens under High Temperature;
高温(火灾)下植筋锚固试件拉拔试验研究
10.
The Study of Slope Stability and the Analytic Method for Internal Forces of Anchor Piles and Caverns;
边坡稳定与锚固洞桩加固构件内力分析方法研究
11.
Application of epoxy anchoring agent during anchorage fixing of bridge cables
环氧锚固剂在桥梁缆索锚具锚固中的应用
12.
2 Where two metal components of an anchor are in contact both components should be the same grade of stainless steel, for example a fixed hanger and an expansion bolt.
2两个金属的锚栓元件,接触之处的材质须为同级的不?,如固定耳片和膨胀锚栓。
13.
Experimental Investitation on Bond Properties between CRC and Bars and Pilot Study on CRC Structures;
CRC与钢筋粘结锚固性能的试验研究及CRC构件受力探讨
14.
The water has an effect on anchoring performance of resin cable bolts.
水对树脂锚索锚固性能具有影响,可导致锚索锚固失效。
15.
Research on the guided wave reflecting from the upper interface of partially grouted rock bolt
导波在端锚锚杆锚固段上界面的反射研究
16.
The Synthetical Factors Influencing the Anchor Performance of the Jaw Vice Anchorage
影响夹片式锚具锚固性能的综合因素
17.
The study on longitudinal vibration regulation of bolt in anchorage quality
锚杆在锚固状态下纵向振动规律研究
18.
THE ANALYSIS OF MECHANICS AND THE PRINCIPLE OF DESIGN ABOUT THE ANCHORAGE DEVICE WITH CLAMPING PIECES
夹片群锚的锚固性能研究及设计原则