1.
Squeeze switch locking tabs inward to release switch from license plate lamp housing.
![点击朗读](/dictall/images/read.gif)
向内挤压开关锁凸耳,以从牌照灯壳中释放开关。
2.
Analysis of Upper Bound Solution in Conmcal Die for Extrusion/Drawing Processes
![点击朗读](/dictall/images/read.gif)
锥形凹模内挤压/拉拔过程的上限解分析
3.
Design of the principles in the hydraulic system of internal high-pressure forming and equal channel angular processing equipment
内高压和等径角挤压设备液压系统原理设计
4.
Effects of Extrusion Pressure on Internal Quality of Semi-solid Hypereutectic High Chromium Cast Iron Extrusion Parts
挤压力对过共晶高铬铸铁半固态挤压件内部质量的影响
5.
a condition in which a tooth is so crowded in its socket that it cannot erupt normally.
![点击朗读](/dictall/images/read.gif)
牙齿被挤压在牙槽内不能生长的状态。
6.
Sejournet extrusion process
![点击朗读](/dictall/images/read.gif)
赛茹尔内玻璃润滑热挤压法
7.
Experiment Research of Propellants Impact and Compression in the Bore;
![点击朗读](/dictall/images/read.gif)
火炮膛内药床撞击与挤压的实验研究
8.
To squeeze the juice or other contents from.
![点击朗读](/dictall/images/read.gif)
挤压从…中把果汁或其他内容物压榨出来
9.
Study on the Stress Distribution of Cold Extrusion Die under Inner Pressure
![点击朗读](/dictall/images/read.gif)
冷挤压模受内压作用应力分布规律的研究
10.
hydrostatic extrusio
![点击朗读](/dictall/images/read.gif)
静水压挤压;静水压挤压;静液力挤压;静液力挤压;液力静挤压
11.
DYNAMIC SIMULARITY EXPERIMENTS OF PROPELLANTS IMPACT AND COMPRESSION IN THE BORE
![点击朗读](/dictall/images/read.gif)
膛内火药床撞击与挤压的动态模拟实验
12.
The Effect of Engraving Force of Projectile on Interior Ballistic Performance of DAVIS Gun
弹丸挤进压力对平衡炮内弹道性能的影响研究
13.
Cold Extrusion Process Simulation for Flywheel's Inner Ratchet and the Die Design;
![点击朗读](/dictall/images/read.gif)
飞壳内棘齿冷挤压工艺模拟分析及模具设计
14.
The Numerical Simulation Research on Extrusion Forming of Aluminum Alloy Cylinder-Shaped Parts with Intracavity Gluten;
铝合金内腔筋筒形件挤压过程数值分析研究
15.
The Global Aluminium Extrusion Market in 2003 and It s Prospect in 2004;
![点击朗读](/dictall/images/read.gif)
2003年国内外铝挤压市场回顾与2004年展望
16.
Simulation and experimental study on cold extrusion forming technology of hole-through internal gear
贯通内齿轮冷挤压成形工艺仿真与试验
17.
Study on Cold Extruding Forming Technology for the Driving Gear of Saw-tooth Inner Gear
![点击朗读](/dictall/images/read.gif)
锯齿形内齿主动齿轮冷挤压成型技术研究
18.
Finite Element Simulation of Internal Pressure of Backward-Extruding Containers and Optimization of Combined-Containers;
反挤压凹模内压力的有限元模拟及组合凹模优化