1.
Study on the Vibration Resistant Design of Pipeline System on the Offshore Platforms in Ice Zone;
冰区海洋平台上部管线系统抗振设计研究
2.
NEW CONCEPTS ON WIND-RESISTANT DESIGN OF BRIDGES--MULTI-MODE COUPLED FLUTTER
桥梁抗风设计的新概念——多振型耦合颤振
3.
A design of Magnetic resonance electrical impedance tomography( MREIT) system is presented.
介绍了磁共振电阻抗成像系统设计。
4.
Study on the Design and Modeling of Nonlinear Vibration and Shock Isolator;
非线性隔振抗冲器的设计与建模研究
5.
Car Audio CD/DVD Anti-Vibration Construction Design;
汽车音响CD/DVD抗振结构的设计
6.
Criterion of mode number selection in seismic design for high-rise building structures
高层建筑抗震设计振型数目选取原则
7.
Design on new anti vibration structure system of shell-and-tube heat exchangers
管壳式换热器新型抗振结构体系及工程设计
8.
Design Study on Marine Hydraulic Antivibration and Antishock Mounting with Inertia Tracks;
船用惯性通道式液力隔振抗冲元件设计研究
9.
Design of Test Plan for Aseismic Model of Large-size Vibration Table in Highway Tunnel
公路隧道大型振动台抗减震模型试验方案设计
10.
Anti-impact design and experiment of the shock-absorbing cavity of the gamma locator in deep oil well
深井伽玛定位仪隔振腔抗冲击设计及实验分析
11.
Research on the Design of Active and Passive Composite Control Device Resisting Impact and Vibration Based on the Electromagnetic Actuator;
基于电磁作动的抗冲击振动主被动复合控制装置设计研究
12.
IMPROVEMENT AND OPTIMIZATION DESIGN OF SPRING STRUCTURE IN THE ACTIVE CONTROL DEVICE RESISTING SHOCK AND VIBRATION FOR MINIATURE DISKS
微型硬盘抗冲击振动主动控制装置中簧片结构的改进与优化设计
13.
The Design Of 1.7GHZ Colpitts-type FBAR Voltage Controlled Oscillator
1.7GHz压控FBAR振荡器设计
14.
Design of Clock Signal Generator Based on ADF4360-1
基于ADF4360-1的本振源设计
15.
Design Vibration Feeder Parameters of Y800X5000
Y800X5000振动给料机参数设计
16.
Frequency design of dynamic vibration absorbers for flutter suppression of a sandwich panel
吸振夹层壁板颤振抑制的吸振器频率设计
17.
The Design and Application of Helix Resonator;
螺旋振子谐振腔滤波器的设计与应用
18.
Using complex-amplitude to design PBS film of 10.6 μm
利用复振幅设计10.6μm偏振分光膜