1.
Discussion on the Application of the Equal-section Slope Column Foundation in the Transmission Line Engineering
送电线路等截面斜柱基础的设计及应用
2.
Application of Inclined Flat-baseplate & Equal-section Column Foundation in 750 kV Transmission Line
斜平面底板等截面斜柱基础在750kV输电线路中的应用
3.
Bearing Capability Test of New Plate-type Foundation With Equal-section Inclined Column Used in EHV Transmission Line
超高压送电线路新型等截面斜柱板式基础承载力试验
4.
Experimental Research on Oblique Shear Strength of Rectangular Frame Column with Different Stirrup Areas on Two Principal Axis;
不等肢配箍矩形截面框架柱斜向受剪承载力试验研究
5.
The Research on the Strength of Normal Section and Inclined Section of Steel Reinforced Concrete Special-Shaped Column;
钢骨混凝土异形柱正截面与斜截面承载力研究
6.
The Basic Construction Method of Overall Unequal-height Oblique Cylinder Plug-in Angle Steel
全方位不等高斜柱主角钢插入式基础的施工方法
7.
SHEAR CARRYING CAPACITY OF CONCRETE FRAME COLUMN WITH S-CLIP OVERLAPPING HOOPS
S-Clip复合箍筋混凝土框架柱的斜截面承载力
8.
Marking tape can be used as a warning signal on the groud or pillar etc.
斜纹印刷胶带可用地面、柱等警示标志。
9.
Research on Bearing Capacity of S. R. C Inequiaxial L-Shaped Columns;
钢骨混凝土不等肢L形截面异形柱正截面承载力研究
10.
Full-scale tests on pad and chimney foundation subject to uplift combined with horizontal loads in aeolian sand
风积沙地基斜柱基础上拔水平力组合荷载试验
11.
A DIRECT METHOD FOR SECTION DESIGN OF SQUARE COLUMNS CONSISTING OF FOUR EQUILATERAL STEEL ANGLE
等边角钢四肢方阵式格构柱截面直接设计法
12.
Experimental Research on the Behavior of Inquiaxial L-Shaped Column Joins;
不等肢L形截面柱框架节点性能的试验研究
13.
Research on Behavior of Inequiaxial Specially Shaped Column Subjected to Biaxial Compression;
不等肢异形截面双向偏心受压柱性能研究
14.
Experimental Research on Shear Performance of Rectangular Frame Columns with Different Area of Stirrups in Both Principal Axes;
不等肢配箍矩形截面框架柱受剪性能试验研究
15.
THE FREE VIBRATION ANALYSIS OF A BAEM PARTLY IMMERSED IN A FLUID ON COUPLED ELASTIC FOUNDATION
部分水下弹性支承等截面梁柱的自由振动分析
16.
Basic experimental study on clinical application of profile scanning
临床上应用截面扫描的基础实验研究
17.
Reconstructing Skewed Quadric Surfaces from the Three Orthographic Views of Engineering Drawings
基于投影特征识别的斜截切二次曲面重建算法
18.
relating to or based upon a section (i.e. as if cut through by an intersecting plane).
关于截面的或以截面为基础的（好像被一个相交平面穿过）。