1.
The Optimization of Parameters and Cathode Shape in ECM for Mixture Rifle
混合膛线电解加工阴极结构和工艺参数优化
2.
Influence of Rotor Structure and Technological Parameters on Mixing Performance of A Two-rotor Continuous Mixer
转子结构和工艺参数对双转子连续混炼机混合性能的影响
3.
Study the Influence Raw Composition and Sinter Craft Parameter on Sinter Phase Structure and Strengh;
原料组成和烧结工艺参数对烧结矿相结构及强度的影响研究
4.
This paper mainly discusses the typical process and cutting-parameter in numerical control of Aircraft Structure Parts.
主要对飞机结构件的加工工艺和加工切削参数进行了研究。
5.
Parameters Effects on the Phase Structure of Boron Nitride Films;
工艺参数对氮化硼薄膜结构相的影响
6.
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
7.
Studies on Preparation, Structure and Parameter Optimization of Carbon Nanotubes and Light Element Compound Nanotubes;
碳纳米管和轻多元素纳米管的制备、结构及工艺参数优化
8.
The Effect of Aging Treatment Parameter on Structure and Performance of High Manganese Steel;
时效工艺参数对ZGMn13钢的组织结构和性能的影响规律
9.
Influence of process parameters on the sizes,structure and mechanical properties of glass-coated Fe-based alloy microwires
工艺参数对玻璃包覆铁基合金微丝尺寸、结构和力学性能的影响
10.
Technological parameter optimization of micro-structured surfaces by diamond fly-cutting
金刚石飞切加工微结构表面的工艺参数优化
11.
The Processes Parameter Controlling of Non-flow Battom Soldering Paste of the FCB Compositon
倒装芯片结构中不流动底部填充工艺参数
12.
The design of the structure parameter and technology of burid SiO_2 optical waveguides;
二氧化硅埋层式光波导结构参数及工艺的设计
13.
Deposition and Microstructures of SiO_2/S Anti-Coking Coatings
工艺参数对SiO_2/S涂层形貌与结构的影响
14.
OPTIMIZATION OF STRUCTURE AND INJECTION MOLDING PARAMETERS FOR PLASTIC PRODUCT BASED ON CAE
基于CAE的注塑件结构及成型工艺参数优化
15.
Structure And Properties of the DLC Films Deposited By RF-PECVD Process
RF-PECVD工艺参数对DLC膜结构及性能的影响
16.
The screw structure parameter will directly effect the thermosetting plastical forming technology and the injecting pro duct quality.
其螺杆结构参数直接影响到热固性塑料的成型工艺和注射制品质量。
17.
The dissertation has applied Imagine Processing Techniques to abstract characteristics of weft knitted jersey stitch.
本文主要讨论了用图像处理和模式识别的方法对纬编平针组织结构进行工艺特征参数提取。
18.
Prepartion of ATO Thin Films by APCVD and Study on the Effects of Technological Parameters on Structure and Properties of Thin Films;
APCVD法制备ATO薄膜及工艺参数对膜结构、性能影响的研究