说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 抽气速率
1.
Lashing velocity of pump is concerned with nature of air.
泵的抽气速率与气体的性质有关。
2.
The Calculational Method of Pumping Rate in Medical Center Suction System
医用中心吸引系统平均抽气速率的计算
3.
Low ultimate pressure, high pumping speed for Ar.
极限压力低、抽气压力范围宽,对氩气抽速较高。
4.
Well injection rates in a particular area would initially be generally similar to pumping, offtake, rates.
对一个具体地段来说,井的注水速率开始时应当接近抽水速率。
5.
Coal Seam Gas-bearing Properties and Theoretical CBM Recoverable Ratios in Wulunshan Mine Area, Guizhou
五轮山矿区煤层含气性与煤层气理论抽采率
6.
HRR Profile Stitching and Velocity Estimation of Step Frequency Radar
频率步进雷达距离像抽取与速度估计的实现
7.
Analysis of pumped-storage hydro using wind power with different probability distribution parameters of wind speed
不同风速概率分布参数下的风力抽水储能分析
8.
On the uncertainty of pumping speed for pumping performance test platform of cryopump
低温泵抽气性能测试平台的抽速测量不确定度研究
9.
The Aerodynamic/Structure Design of Subsonic Aspirated Compressor Cascade;
亚声速附面层抽吸式扩压叶栅气动/结构设计
10.
Impact of suction position on starting of hypersonic inlet
抽吸位置对高超声速进气道起动性能的影响
11.
Application of frequency-modulated speed control to air-cooled large-size JZJQH2500-224 Roots vacuum pumping system
变频调速在大型气冷罗茨真空泵JZJQH2500-224抽气系统中的应用
12.
Carbon black for use in the rubber industry--Determination of light transmittance of toluene extract--Rapid method
GB/T3780.15-1997橡胶用炭黑甲苯抽出物透光率的测定快速法
13.
Effect of Drawing Rate on Microstructure Evolution of Ti-47.5Al-2Cr-2Nb-0.2B Alloys under Directional Solidification
抽拉速率对Ti-47.5Al-2Cr-2Nb-0.2B合金的定向凝固组织的影响
14.
Effect of Air Flow Rate and Air Temperature on Wood Drying Rate;
空气流速和温度对木材干燥速率的影响
15.
The results show that the deposition rate is related to the working pressure at a given power density.
在功率密度一定时,沉积速率和工作气压有关.
16.
And the gasification reaction rate decreases with an increasing of carbon conversion.
气化反应速率随着碳转化率的增加而降低。
17.
Probabilistic distribution model for release rates of H_2S in sour gas wells of Sichuan and Chongqing areas
川渝地区含硫气井H_2S释放速率的概率分布模型
18.
Test methods for leak rate of cryogenic containers
GB/T16775-1997低温容器漏气速率测定方法