1.
Dynamic Response Optimization of Structures and Robust Optimal Design in Structural Dynamics;
结构动力响应优化和结构动力鲁棒设计研究
2.
Dynamic response optimization of grillage structures using equivalent static algorithm
基于等效静力算法的船舶板架结构动力响应优化设计
3.
Dynamic Response and Optimization for Composites Directional Tube
复合材料定向管动力响应及优化分析
4.
Random Dynamic Analysis and Parameter Optimization of Ins Bracket;
惯导支架结构的随机动力响应分析与参数优化
5.
Analysis of Structural Dynamic Response and Research of Optimal Dynamic Design Based on Probability;
基于概率的结构动力响应分析与动力优化设计研究
6.
Model Test Study on Motion and Dynamic Response and Optimization of Berth in Open Water Area
开敞水域系泊船舶运动及动力响应研究与泊位优化
7.
Study on Dynamic Reaction of Metal Oxide Gas Sensors & Sensor Array Optimization
金属氧化物气体传感器响应动力学特性与阵列优化研究
8.
Dynamic Response and Optimization Questions Based on Finite Element Method for the Horizontal Axis Wind Turbine Tower
基于有限元法的水平轴风力机塔架动态响应与优化问题研究
9.
Optimize for responsiveness; accommodate latency.
优化响应能力，调节延迟时间。
10.
The Dynamic Response Analysis and Structure Optimization Study of the Suspension Bridge;
悬索桥动载响应分析及结构优化研究
11.
The Effect of Density Changes on Polyesterification Kinetics
密度变化对聚酯化反应动力学的影响
12.
Hemodynamic Effect of Optimized Double Intra-aortic Balloon Pumping
优化主动脉内气囊反搏的血液动力学效应
13.
Thermal Stress Calculation and Start-up Optimize of Intermediate Pressure Cylinder Start of 300MW Steam Turbine;
300MW机组中压缸启动热应力计算与启动优化
14.
Modeling and application of design optimization for steam power system in petrochemical industry
石化企业蒸汽动力系统优化设计建模及应用
15.
Cable Forces Optimization and Multi-Support Random Seismic Response of Cable-Stayed Bridges
斜拉桥索力优化及多点随机地震响应分析
16.
Optimal design of the mechanical properties of bamboo plywood form based on response surface model
基于响应面模型的竹胶合板模板力学性能优化
17.
Lastly, the paper presents derivatives of the unsteady aerodynamic load with respect to design variables and investigates the optimum design subjected to flutter constraint by means of a feasible-direction method.
推导了非定常气动力和颤振响应参数对设计变量的导数,研究了颤振约束下的优化设计。
18.
Process Optimization of Injection Part Based on Moving Least Squares Response Surface Method;
基于移动最小二乘响应曲面的注塑件工艺优化