1.
Apply a small amount of engine oil to each fuel injector o-rinThis will help in fuel rail installation.
向每个燃油喷嘴上涂少量的引擎油。这将有助于燃油轨道的安装。
2.
Remove fuel rail by gently rocking until all the fuel injectors are out of intake manifol
轻轻摇动直到所有燃油喷嘴脱离进气歧管，由此拆卸燃油轨道。
3.
Comparative Experiment Study of Fuel Nozzles for an Aeroengine
某型航空发动机燃油喷嘴对比试验研究
4.
Multidisciplinary Design Optimization for Fuel Nozzle of High Pressure Common-Rail Injection System Based on Self-Adaptive Particle Swarm Optimization Algorithm
自适应粒子群优化的高压共轨燃油喷嘴多学科优化设计
5.
Remove injector(s) from fuel rail.
从燃油轨道上拆卸喷嘴。
6.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
7.
steam atomizing oil burner
蒸汽雾化型油喷燃器;蒸汽雾化油燃烧器(烧嘴)
8.
At higher speeds, a larger amount of fuel tends to be discharged from the main nozzle.
在较高转速时。主喷嘴会喷出大量的燃油。
9.
The Research for Simulation of the PPVI Fuel Injection System on Diesel;
柴油机电控泵管嘴燃油喷射系统仿真研究
10.
aperture atomizer
喷孔式喷油嘴喷雾器
11.
Remove fuel supply line latch clip at injector rail.
拆下喷嘴托杆处之燃油供应管线搭扣夹。
12.
Experimental investigation of kerosene supersonic combustion test using aerated-liquid injectors
应用气泡雾化喷嘴的煤油超声速燃烧试验
13.
The Experiment Research by the Application of Conical Nozzle and Double Squish Flow Annular Chamber on Diesel Premixed Charge Compression Ignition Combustion;
采用伞喷油嘴和双层流动燃烧室实现均质预混合燃烧的试验研究
14.
Three-dimensional Numerical Simulation of Locomotive Diesel Engine Injection Nozzle;
16V280柴油机燃油系统新型喷嘴的三维流场数值模拟计算
15.
Application of Impingement Nozzle and Pilot to Diesel Premixed Charge Compression Ignition Combustion;
采用碰撞油嘴和分段喷射组织均质预混合燃烧的试验研究
16.
supersonic oxygen-fuel oil burner
超音速氧-燃料油喷燃器
17.
compressed air-fuel oil burner
压缩空气-燃油喷燃器
18.
Fuel Injector Line At Injector
在喷油器处的燃油喷油器管线