1.
Erosion Properties and Mechanisms of B_4C/TiB_2/Al_2O_3 Series Nozzles
B_4C/TiB_2/Al_2O_3喷嘴冲蚀性能及其冲蚀机理
2.
Erosion Properties and Mechanisms of B_4C/TiB_2/Mo Series Nozzles
B_4C/TiB_2/Mo喷嘴冲蚀性能及其冲蚀机理
3.
The equipment for underwater abrasive water jet under high ambient pressure and a study of eroding properties
水下高围压磨料射流装置及冲蚀性能的研究
4.
There are many influence factors in submerged abrasive waterjet erosion performance.
影响淹没磨料射流冲蚀性能的因素很多。
5.
Study on Laser Surface Ruggedisation and High Temperature Erosion of High Chromium Caststeel;
高铬铸钢激光表面强化与高温冲蚀性能研究
6.
Study on the Resistance of Arc Spray Metal Coatings to Erosion in Splash Zone
电弧喷涂金属涂层耐海水冲蚀性能研究
7.
Microstructure and Erosion Resistance of Fe-Based Amorphous/Nanocrystalline Coatings
铁基非晶纳米晶涂层组织及耐冲蚀性能的研究
8.
Effect of Nanoparticles on the Erosion-Corrosion Resistance Property of a Ni-Based Alloying Layer
纳米颗粒对Ni基复合镀渗层耐冲蚀性能的影响
9.
It has merits like fine heat stabilization good eroding resistion and so on.
热稳定性好，抗冲刷，耐侵蚀能力强。
10.
Study on erosion resistant nano epoxy adhesive coating
环氧胶粘纳米涂层冲蚀磨损性能研究
11.
Research on the Erosion Wear of Reactive Sintering Silicon Carbide;
反应烧结SiC陶瓷冲蚀磨损性能研究
12.
Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC Composite
Si_3N_4-SiC复相耐磨材料的冲蚀磨损性能
13.
Measurements of impulse coupling coefficient for laser ablating PVC film on transmission mode
透射式激光烧蚀PVC冲量耦合性能实验
14.
Study on Erosion-Wear Resistance of Carbon Steel and Stainless Steel
碳钢不锈钢材料抗冲蚀磨损性能研究
15.
Effect of Mechanical Properties on Erosion Resistances of B_4C/TiB_2 Matrix Ceramic Nozzles
力学性能对B_4C/TiB_2基陶瓷喷嘴抗冲蚀特性的影响
16.
Effect of Lanthanum on Impact Wear Behavior and Mechanism of Liner-board Steels in Corrosive Slurry
镧对衬板钢在腐蚀料浆环境下的冲击腐蚀性能与机理的影响
17.
Slurry Erosion Resistance of Alundum Reinforced Polymer Composite Material;
刚玉增强聚合物复合材料冲蚀磨损性能的研究
18.
Study on Structure and Property of the Erosion-resistant Alloys at High Temperature;
抗高温冲蚀磨损合金组织与性能的研究