1.
Flow-induced vibration analysis for the secondary support assembly of reactor internal
堆内构件防断支承组件流致振动分析
2.
The supporting case is the outer enclosure of the gyro component.
支承壳体是陀螺组件的外壳。
3.
The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.
耳轴组件的支承是每根臂末端的空气轴承，轴承上的闸瓦起定位作用。
4.
specimen-holder assembly
样品（支持）器组件
5.
This equipment is made up of kiln body, support device, supporting device with shelf, moving kiln head, sealing device for kiln tail, burning device and etc. parts.
该设备由筒体、承装置、档输支承装置、动装置、动窑头、尾密封装置、烧装置等部件组成。
6.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
7.
Shaft Assembly (Male, female, washer, grease….
轴组件（轴，轴套，轴承，油脂。。。）
8.
The Research of the Relationship between Perceived Organizational Support and Organizational Commitment;
组织支持感受与组织承诺的关系研究
9.
Failure Analysis on the Break of Back-up Roller Body;
1700mm连轧机组支承辊辊身断裂失效分析
10.
The fork of a pole or other support.
柱子或其它支承物的叉状部件.
11.
ANNEX 2 DOMESTIC SUPPORT: THE BASIS FOR EXEMPTION FROM THE REDUCTION COMMITMENTS
附件2 国内支持：免除削减承诺的基础
12.
The Effect to Stability of Steel Members by Bracing Location;
支撑位置对钢构件稳定承载力的影响
13.
The Stability Analysis for the Frame of the Aluminum Ingots Continuous Casting Machine;
铝锭连续铸造机支承件的稳定性分析
14.
Study on Ultimate Bearing Capacity of Fastener-style Tubular Steel Falsework
扣件式钢管模板支架极限承载力研究
15.
Contact stress anslysis of rotary-support component under tractive rolling contact
回转支承构件牵引滚动接触应力解析
16.
Four boundary conditions, such as fixed clamp, moving clamp, hinge support and simple support, are considered.
文中考虑了固定夹紧、移夹紧、支承及简单支承等4种边界条件.
17.
The mast assem-bly supports the rotary drill head and its hoisting mechanism.
支架组件支持转动钻头及其提升机构。
18.
Semantic Web Service Composition Supports If-Then-Else Structure;
支持条件分支的语义Web服务组装