1.
Command-line error: Invalid port for serial port mapping.
命令行错误: 串行端口映射的端口无效。
2.
Command-line error: Invalid file for serial port mapping.
命令行错误: 串行端口映射的文件无效。
3.
The following serial devices are compatible with the selected transport type. Select the serial device, modem, or serial port you want to use.
下列串行设备跟所选的传输类型兼容。选择要使用的串行设备、调制解调器或串行端口。
4.
Remote Access setup can only do modem detection on a serial port.
远程访问安装程序只能在串行端口上进行调制解调器的检测。
5.
All you need in order to set up a TCP/IP connection is the lowly serial port your PC already has.
建立TCP/IP连接所需要的只是PC机已具备低档串行端口.
6.
If your mouse uses a serial port, it helps if you know which port.
如果你的鼠标使用一个串行端口，如果你知道哪一个移植，它帮助。
7.
Any instruction sent via the serial interface will be prioritary on the configuration switches setting and the input signals state.
经由串行端口传送的任何指令优先于配置开关设定和输入的状态信号。
8.
If your pc have only a 25 - pin serial port available , you must obtain a 9 - pin - to - 25 - pin adapter
如果你的PC仅有一个可用的25针串行端口，你必须得到一个9针-25针适配器
9.
In many cases, configuring a device for a serial port is as simple as linking to the driver of the associated port.
在许多情况，为一个串行端口配置一个装置像对联合埠的驱动器联接那样简单。
10.
Connect using my serial, parallel, or infrared port.
使用我的串行、并行或红外端口连接。
11.
Select the com port to which you connected the settop serial cable and click next
选择com端口连接SETTOP串行电缆，单击 Next
12.
Application of the program for the serial port and the onboard port based on CB
基于CB的串行口和接口板端口程序应用
13.
The Simulation of UART Function with Modelism;
异步串行数字收发通信端口(UART)的Modelsim仿真
14.
You must use the top rs - 232 ( serial ) data port on the system for connection to the pc .
你必须使用系统最上面的RS-232（串行）数据端口来连接到PC
15.
An I /O port through which data is transmitted and received serially, used for communicating with terminals.
一种输入输出(端)口,数据通过它进行发送和接收全是串行的,常用于与终端(机)的通信。
16.
Universal Serial Bus (USB) is similar to a serial port.
通用串行总线（USB）与串行口相似。
17.
Connect to another computer using your serial, parallel, or infrared port.
使用串口，并口或红外端口连接到其它计算机。
18.
Interface of Serial Communication Programming in Win32;
32位视窗系统串行通讯的串口设置