1.
Elastic-plastic deformation effect on distribution of stress and axial force in a threaded bolt
弹塑性变形对螺栓应力和轴力分布的影响
2.
Compution on Pressure Distribution of Stern Bearing Liquid Film Reckoning in Inclination of Stern Shaft
计入艉轴倾角的船舶艉轴承液膜压力分布计算
3.
Distribution Rule Research on Temperature and Pressure in Sliding Bearing under Dynamics
滑动轴承动力学温度及压力分布规律研究
4.
The Effects of the Distribution of Reaction Force in the Blade Shaft Hole on Stiffness and Strength of Kaplan Turbine Runner
枢轴反力分布对轴流式水轮机转轮体刚强度影响分析
5.
Numerical Analysis of Dynamic Response and Axial Stress Distribution of Rock Bolts Under Explosive Loads
锚杆动载响应和轴向应力分布规律数值分析
6.
The pressure distribution was simulated with a approximate method.
采用近似方法模拟径向滑动轴承压力场分布。
7.
Numerical Calculation to the Pressure Distribution of Journal Bearing Based on the Matlab;
基于MATLAB的滑动轴承压力分布的数值计算
8.
Probability distribution of ultimate resistance capacity of axial loaded short concrete-filled tube column
钢管混凝土轴心受压短柱承载力概率分布研究
9.
Effect of Notch Parameters of Round Shaft on Stress Distribution under Torsion
扭转载荷下缺口参数对圆轴应力分布的影响
10.
Investigation of Pressure Distribution of Partial Porous Aerostatic Thrust Bearing
局部多孔质气体静压止推轴承压力分布的研究
11.
2-D Numerical Analysis on Influence of In-situ Stress on Tunnel Axis Orientation
地应力对洞室轴线布置影响的二维数值分析
12.
axial power distribution monitoring system
轴向功率分布监测系统
13.
Effect of Triaxial Stress on the Plastic Zone Distribution in Front of Crack Tip with Mixed Mode Loading
三轴应力状态下复合型裂纹尖端前缘的塑性区分布
14.
Research on the Distribution of the Cold-formed Stresses and the Overall Stability of the Axially Compression Members in the Effect of Residual Stresses;
冷弯残余应力分布及其影响下的轴压构件整体稳定性研究
15.
Finite Element Analysis on Pressure Distribution of Partial Porous Aerostatic Circular Thrust Bearing
局部多孔质气体静压圆盘止推轴承压力分布的有限元计算
16.
Study on Contact Stress Distribution of Roller Bearings and Roller Profile Design under Misaligned Loads
偏载滚子轴承的接触应力分布计算及其滚子凸度设计
17.
Axial and radial profiles of hydrodynamic parameters of external-loop airlift reactor
气升式外环流反应器流体力学参数的轴径向分布
18.
Analysis of Alignment of Shaft-core Line Between Crankshaft of Marine Diesel and Thrust Shaft
船舶柴油机曲轴与推力轴轴线校中分析