1.
Method to detect arcing time of circuit breaker
一种断路器开断燃弧时间检测新方法
2.
Analysis on Arcing Characteristics and Experiments of Electrical Contacts in Automobile Relays;
汽车继电器电触头燃弧特性分析及试验研究
3.
A NEW ARC FURNACE BURNER SYSTEM--SPLIT-FIRE BURNER
一种新型的电弧炉用烧嘴——分燃式烧嘴
4.
Study on Characteristics of Laser Inducing Plasma for Triggering TIG Arc Discharge;
激光等离子体引燃TIG电弧特性研究
5.
The Stability of A. C. Arc durning and the Device for Producing BiPolar Voltage Pulses
交流电弧燃烧的稳定性及双向电压脉冲稳弧装置
6.
Study on Reducing Arc Establishing Rate and Arc Rekindling Rate of Gap Lightning Protecton Device for Distribution Lines;
降低配网防雷间隙建弧率及电弧重燃率的方法研究
7.
APPLICATION OF POST?COMBUSTION TO EAF ?STEELMAKING PROCESSES
二次燃烧技术在电弧炉炼钢过程中的应用
8.
THE COMBUSTION CHAMBER IN MODERN EAF STEELMAKING AND ITS DESIGN REQUIREMENT
现代电弧炉炼钢中的烟道燃烧室和设计要求
9.
The Study on the Metallic Bipolar Plates of Fuel Cell Modified by Films Deposited by AIP;
燃料电池金属双极板电弧离子镀薄膜改性研究
10.
The research on kindling characteristic testing system of electrical arc discharge in intrinsic safety circuit
本质安全电路电弧放电点燃特性检测系统研究
11.
The electric arc furnace is better for the production of special steels than any other types of furnace, since it needs no fuel.
电弧炉用来生产特殊钢比用任何其他炉子都好，因为它不需要燃料。
12.
Analysis of Dielectric Recovery Strength and Reignition Process in Iron Splitters Chambers of AC Contactor
接触器栅片灭弧室介质恢复强度及重燃过程的分析
13.
Such cells are not yet widely used on power systems, but as they are being developed there have been some applications to supply fuel cell power to isolated loads.
这种燃料电池尚未应用于电力系统,但正在研制应用燃料电池向弧立负藉供电。
14.
The procedure and characteristic of the arc discharge, feature of ignitron, firing way, structure features and its application are described in the paper.
文中叙述了弧光放电的过程和特征、燃管的特点、燃方式、构特点及其应用。
15.
Although less spatter, more stable arc, short circuit non-explosive transfer, as a main transfer mode of SSFCW is lack of effective protection for droplet.
而短路非爆炸这种主要的过渡形式虽然飞溅小、弧燃烧也较稳定，但对熔滴保护效果较差。
16.
The AC arc on pollution surface is alternate in strength in each cycle and even extinguishes and reignnes during the current passing through zero.
沿染污绝缘表面的交流电弧在每周内强度交变，甚至当电流过零时发生熄灭和重燃。
17.
The oxygen lances for electric arc furnace steelmaking can be divided into oxygen burning lance and blowing oxygen and burning carbon lance.
电弧炉炼钢用氧枪分为吹氧助熔用氧枪 (氧燃喷枪 )和吹氧烧碳用氧枪两类。
18.
island arc-island arc collision
岛弧对岛弧碰撞作用