1.
Study on Two Analysis Methods of Load-relieving Process by Temporary Supports;
探讨临时支撑卸载分析中的两种方法
2.
Whole removal process simulation of temporary support of Jinan Olympic Stadium
济南奥体中心体育场钢结构支撑卸载全过程模拟
3.
Remove cylinder attaching bolts and remove cylinder from support plate.
拆卸分泵附接螺栓并从支撑板上拆卸分泵。
4.
To remove from a support, setting, or mounting.
从支撑物、底板、底座取下，卸下
5.
Remove nut securing pedal shaft in support bracket.
拆卸支撑托架上连接踏板轴的螺帽。
6.
Lectotype and Improvement of Safety Supporting Device of Dump Truck
自卸汽车安全支撑装置的选型与改进
7.
To stabilize or provide with ballast.
用压载物来稳定或支撑
8.
Remove plug from each access hole in brake support plates.
从刹车支撑板中的每个检查孔中拆卸活塞。
9.
Remove Prop shafts (refer to Group 2, Suspension and Driveshafts).
拆卸支撑轴（请参阅第2单元“悬吊和传动轴”）。
10.
The maximum load , span of supports YueLong brand type cable tray must be less allowable load and span of supports .
“跃龙”品牌系列电缆桥架的最大载荷、支撑间距应小于允许载荷和支撑荷和支撑跨距。
11.
The Effect to Stability of Steel Members by Bracing Location;
支撑位置对钢构件稳定承载力的影响
12.
Module Unload: %s.
模块卸载: %s.
13.
Lower the lifting device enough to remove the axlThe coil springs will drop with the axle.
降低支撑设备以拆卸车轴。螺旋弹簧随车轴同时拆下。
14.
This paper presents the structure of the scaffold, as well as setting precamber and decentering techniques.
对该支撑拱架的结构、预留拱度设置、拱架卸落等进行了介绍。
15.
Dynamic Unloading Simulation and CFD Numerical Simulation of Hydraulic Operated Check Valve;
支架液控单向阀卸载动态仿真和CFD数值模拟
16.
Fully supports special machine options such as Work Chutes, Loader/Unloader, and Right-angle Shears.
支持机床的特殊功能,如落料口,加载器/卸载器,以及直角剪.
17.
Bracing Design Method of Longitudinal Column-Bracing System under Vertical Loading
竖向荷载下纵向柱列支撑的设计方法研究
18.
The Environment Load and the Strength Analysis of the Offshore Wind Turbine Support Structure
近海风电场环境载荷和支撑结构强度研究