1.
Research on turning interpreter and tool path generator based on STEP-NC
基于STEP-NC车削解释器及刀具轨迹生成器的研究
2.
The Tool Path Generation Software System for 2Dimensions Numerical Control;
二维数控刀具轨迹自动生成软件系统
3.
System for Tool Path Generation of 2D Contour Milling of Die;
模具二维轮廓铣削加工刀具轨迹生成系统
4.
Research on Direct Generation of NC Tool Path from Point Cloud;
基于点云的数控加工刀具轨迹直接生成的研究
5.
Technology of Generating NC Tool Path for Subdivision Surfaces Based on Catmull-Clark Scheme;
基于Catmull-Clark模式的细分曲面NC刀具轨迹生成技术
6.
Research and Practice of Tool Path Generation in NC Programming for Complex Multi-surfaces;
复杂多曲面数控加工刀具轨迹生成方法研究
7.
Research and Implementation for Tool Path Generation of Free Form Surfaces Machining
曲面加工刀具轨迹生成技术的研究与实现
8.
Research on the Generation of Contour Tool Path from the Triangular Mesh Model
三角网格模型等高线刀具轨迹生成研究
9.
A Study on Helix CNC Tool Path Generation Based on Pro/E
基于Pro/E的螺旋线数控刀具轨迹生成研究
10.
Non-isoparametric Tool-path Planning Based on Plunge Milling
基于插铣加工的非等参数刀具轨迹生成方法
11.
Research on Algorithm of NC Turning Machining Tool Path Planning and Generation
数控车削加工刀具轨迹规划和生成算法研究
12.
The Automatic Generation Rescerch of Tool Paths for Surfaces Machinning Based on Space-Filling Curves;
基于填充曲线的曲面数控刀具轨迹自动生成算法研究
13.
Research on Simulation and Algorithm of Automatic Generation of Interference-free Tool Path of Freeform Surfaces with Curves of Cross Sections in NC;
数控加工中截面线法刀具轨迹的生成与仿真研究
14.
Tool-Path Programming Research Based on UG Redevelopment in NC Machining;
基于UG二次开发的数控加工刀具轨迹生成系统的研究
15.
Research on Algorithm of Automatic Generation of Interference-free ToolPath of Freeform Surfaces with Curves of Cross Sections in the Machining of the Freeform Surfaces;
自由曲面加工中基于截面线法的刀具轨迹生成研究
16.
The tool-path generation for the integral impeller based on the second development of UG
UG二次开发的整体叶轮刀位轨迹生成
17.
The key technical research in interference-free tool path of torus cutter
圆角刀无干涉刀具轨迹关键技术研究
18.
Abstract: When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
文摘:在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。