1.
Mechanical Behavior of Bolt-weld Joints between Square Concrete-filled Tubular Column and Reduced Beam Section
方钢管混凝土柱—削弱钢梁端栓焊连接节点受力性能
2.
Study on Square Box Bolt Welding Girder Steel Bridger Interface Friction-increasingcoat;
方箱式栓焊梁钢桥梁连接面增摩涂层的研究
3.
Component installation of nodes connected by bolts or welding required inspection Connections after passing before welding or fastening.
构件安装采用焊接或螺栓连接的节点,需检查连接节点,合格后方能进行焊接或紧固.
4.
Frame of front-wheel double-drum component: It is of formed steel welding structure，which is connected with main frame by bolts.
前轮双转鼓组件框架：型钢焊接结构，通过螺栓与主框架连接。
5.
Fracture Mechanism, Cyclical Performance and Design Recommandations of Welded Flange-Bolted Web Beam-To-Column Rigid Connections in Steel Moment Frames under Seismic Load;
钢框架梁柱栓焊刚性连接的滞回性能、破坏机理及抗震设计建议
6.
openings through welded joints
通过焊接连接处的开孔
7.
double-studded flange
双头螺栓连接的法兰
8.
boiler band joining eye bolt
锅炉带圈连接眼螺栓
9.
studded-flange connection
带柱螺栓的法兰连接
10.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
11.
Improvement of Stud Welding Process And Increase Qualified Rate of Welding
改进栓钉焊接工艺 提高焊缝一次合格率
12.
solder together by using hard solder with a high melting point.
用高熔点的焊料来连接。
13.
TFE disc valves limite to450 oF temperatures.
焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内。
14.
A resin material used in soldering electrical connections.
焊接电气连接点时使用的松香之类的助焊剂。
15.
Discussion on Strip Butt-welding Method of CT80 Grade Coiled Tubing Made in China
国产CT80级连续油管用钢带对接焊焊接方法探讨
16.
The Statistical Distribution of Bolt-Hole Clearance in Bolt Joints;
螺栓连接件中栓孔间隙分布规律的研究
17.
All gas line joints shall be orbital welded except those connecting to valves.
所有气体管路的连接采用无缝焊接。
18.
LAP ARGON ARC WELDING TECHNOLOGY OF THE TITANIUM - ALLOY TUBE
钛合金管路连接件的搭接氩弧焊工艺