1.
From American Automobile 2mm Program to China Automobile Manufacturing Quality Program;
从2mm工程看我国汽车制造质量工程
2.
Metals--Cupping testing method (thickness 0.2~2mm)
GB/T4156-1984金属杯突试验方法(厚度0.2~2mm)
3.
The notch, to be accurate, should not be wider than 2 mm.
精确地说,刀眼不能超过2mm宽。
4.
Experimental and Design Method Study on Cold-formed Channel Steel Columns with Section Thickness Less Than 2mm under Axial Compression;
壁厚2mm以下冷弯槽钢轴压柱试验与设计方法研究
5.
Experimental Study and Theoretical Analysis on Load Carrying Apacity of Cold-Formed Flexural Members with Thicknesses Less Than 2mm;
壁厚小于2mm冷弯薄壁型钢受弯构件承载力试验研究及理论分析
6.
Experimental study on behavior of cold-formed steel flexural members with thickness less than 2mm
壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
7.
industrial and management engineering
工业工程和管理工程
8.
Afterpartial elimination of the apneustic center by transection at the level 1-2 mm ros-tral to striae meduilares,morphine would more effectively induce the depression,It suggests that the apneustic center attenuates the depression.
如进一步在髓纹前方1—2mm处横断脑干,则静脉注射吗啡又能引起膈神经放电抑制。
9.
2?? the quality of product cannot meet the standard:error more than 2mm,cause many unreasonable waste;
2 质量不高，信封起墙误差2mm以上，导致后道产品上离型纸时浪费很大；
10.
Civil Engineering Office [Civil Engineering Department]
土木工程处〔土木工程署〕
11.
formation and servicing
平整工程及辅助工程
12.
Municipal Sector Division [Electrical and Mechanical Services Department]
市政工程部〔机电工程署〕
13.
Vehicle Engineering Division [Electrical and Mechanical Services Department]
车辆工程部〔机电工程署〕
14.
Airport Sector Division [Electrical and Mechanical Services Department]
机场工程部〔机电工程署〕
15.
Health Sector Division [Electrical and Mechanical Services Department]
卫生工程部〔机电工程署〕
16.
Project Division [Electrical and Mechanical Services Department]
工程策划部〔机电工程署〕
17.
Engineering Geology Graduate
见习工程地质工程师
18.
Construction operation specification for bricklaying engineering
砌筑工程施工操作规程