1.
This paper discusses the most suitable design of the homocentric ball capacitor on the condition that the maximum pressure endurance is limited and the puncture field is strong.
讨论了在限定最大耐压值及介质的击穿场强的情况下，同心球形电容器的最佳尺寸设计。
2.
According to the relational expression, the basic size of cam mechanism can be defined.
由关系式计算最佳凸轮机构的基本尺寸。
3.
A DESIGNING METHOD OF THE MINIMUM SIZE OSCILLATING FOLLOWER CYLINDER CAM MECHANISM
最小尺寸摆动从动杆圆柱凸轮机构的设计法
4.
A Designing Method of the Minimum Size Oscillating Follower Arc Surface Cam Mechanism
最小尺寸摆动从动杆弧面凸轮机构的设计方法
5.
Study on the Method of Designing Planar Disc Cam Mechanism with Minimal Dimension
平面盘形凸轮最小尺寸的设计方法探讨
6.
A Seeking Method For Determination of the Optimum Dimeutions of Disc Mechanisms with Swing Roller Followers
滚子摆动从动杆盘形凸轮机构最佳尺寸的确定
7.
Double-Objective Optimal Design for Minimum Size and Maximum Efficiency of Disk Cam Mechanism
盘形凸轮机构按尺寸最小和效率最高的双目标优化设计
8.
the method of designing the dimension of the cap and proposal of eliding the cushion of the composite foundation are presented.
最后,还提出了桩帽尺寸的设计方法以及取消碎石垫层的建议。
9.
A Designing Method of the Follow Planar Cam Mechanism With Minimum Size Translating Flat-bottom
最小尺寸直动平底从动杆平面凸轮机构的设计方法
10.
THE ANALYTICS FOR DESIGAING MINIMUM SIZE OSCIUATING FOLLOWER DISC CAM MECHANISM IN ACCORDANCE WITH ALLOWABLE PRESSURE ANGLE
按许用压力角设计最小尺寸的摆动从动杆盘形凸轮机构的解析法
11.
<title>Minimum dimension design of disc cam mechanism with upright installed concave arc bottomed translating follower
正置式凹圆弧底直动从动件盘形凸轮机构的最小尺寸设计
12.
Application of Structural Topology, Shape and Size Optimization Method in the Design of Cable-stayed Bridge Girders;
结构拓扑、形状和尺寸最优化方法在斜拉桥加劲梁设计中应用
13.
ZEMAX's Application in Dimension Calculation of Optical Design
ZEMAX在光学设计外形尺寸计算中的应用
14.
OPTIMUM SIZE OF TRANSVERSAL ISOTROPIC SPECIMEN IN DYNAMIC TESTING USING THE SPLIT HOPKINSON PRESSURE BAR
横观各向同性材料动态力学性能试验中的试件最佳尺寸
15.
Cold cracks will be avoided when the width and height of cavity is accurately chosen.
文章通过试验确定了最佳的空腔尺寸，此时可防止冷裂纹的产生。
16.
Building Plan: Window Number, Size, Type
建筑设计图: 窗户编号、尺寸、类型
17.
Building Plan: Door Number, Size, Type, Thickness
建筑设计图: 门编号、尺寸、类型、厚度
18.
undersized slot concept
选择偏小割缝尺寸的设计概念