1.
inlet connection
进气管(接头), 入口连接
2.
The gases pass into the exhaust manifold.
这些废气进入排气歧管。
3.
Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
安装进气歧管（见单元11-排气系统和进气歧管）。
4.
Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
拆下进气歧管（见单元11-排气系统和进气歧管）。
5.
Install charge air cooler hose to intake manifol
安装充电空气冷却油管到进气歧管。
6.
Remove intake manifold bolts.
拆下进气歧管螺栓。
7.
Disconnect the exhaust pipe from the exhaust down manifold (refer to Group 11, Exhaust system and Intake Manifolds).
从排气下行管断开排气管（请参阅第11单元“排气系统和进气歧管”）。
8.
manifold (intake and exhaust) for internal combustion, aircraft engines
歧管（进气和排气）,航空内燃机用
9.
Intake Air Sensor Location—Engine
进气歧管空气感知器—0L引擎
10.
INTAKE MANIFOLD AIR TEMPERATURE SENSOR—ENGINES
进气歧管空气温度感知器—引擎
11.
Install throttle body to intake manifol
安装节气阀体至进气歧管。
12.
Connect the suction/discharge hose to the compressor.
连接进气/排气软管至压缩机。
13.
Air leak between the turbocharger and the intake manifol
透平增压器和进气歧管之间空气泄漏。
14.
The Research on the Performance of Timed Manifold Injection Hydrogen-Fueled Engine;
进气歧管喷射式氢气发动机性能研究
15.
Connect the exhaust down pipe to the exhaust system refer to Group 11, Exhaust System and Intake Manifol
连接排气下行管到排气系统，请参阅第11单元“排气系统和进气歧管”。
16.
Numerical Simulation of the Backflow in the Intake Manifold on 4110 Diesel;
4110柴油机进气歧管进气回流数值仿真及优化
17.
Simulation Study on Charge Unevenness for Air Intake Manifold Construction
进气歧管结构对进气不均匀性影响的仿真研究
18.
Technology Advances Key Worldwide Gas Pipeline Developments;
技术进步是促进输气管道发展的关键