1.
Research on the Applied Calculation Method for the Special-Shaped Steel Column Subject to Axial Compression and Biaxial Bending;
钢异形柱双向压弯承载力实用计算的研究
2.
Study on Stability Capacity of Aluminium Beam-Columns;
铝合金结构压弯构件稳定承载力研究
3.
The Ultimate Load-Carrying Capacity in-Plane of Tapered Member;
楔形压弯构件平面内稳定极限承载力
4.
Study of Load Carrying Capacity of Cold-Formed Square Hollow Section Columns under Axial Load;
轴心受压冷弯方管柱承载力性能研究
5.
The Practical Way of an Analysis of Stability Capacity of Steel Beam-columns;
钢结构压弯构件稳定承载力分析的实用方法
6.
Experimental Research and FEM Simulation of Ultimate Axial Compression of Cold-formed Medium Wall Hollow Steel Columns;
中厚壁冷弯钢管柱轴压承载力试验研究与分析
7.
Research on the Axial Compression Capacity of Cold-formed Stainless Steel Tubular Columns;
冷弯薄壁不锈钢管轴心受压稳定承载力分析
8.
Equivalent beam-column method to estimate critical load for steel tubular arch under compression and bending
压弯钢管拱极限承载力计算的等效梁柱法
9.
Experimental Investigation on Load-Carrying Capacity Design Method for Eccentrically-Compressed High-Strength Cold-Formed Thin-Walled Steel Columns;
高强冷弯薄壁型钢压弯构件承载力设计方法试验研究
10.
Experimental Verification on the Calculation of the Castellated Beam-Columns′ Stability and Carrying Capacity in Plane
蜂窝式压弯构件弯矩作用平面内稳定承载力计算的试验验证
11.
LIMIT STRENGTH OF LIPPED H-SECTION MEMBERS UNDER BOTH COMPRESSION AND BENDING
卷边翼缘工形构件在压弯荷载作用下的稳定承载力设计理论
12.
Experimental Investigation on Load-carrying Capacities of Eccentrically-compressed Members and Self-drilling Screw Shear Connections of Cold-formed Thin-Walled Steel Structures;
冷弯薄壁型钢偏压构件及自攻螺钉连接承载力试验研究
13.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
14.
Experimental Study on 550MPa High Strength Cold-formed Thin-walled Steel Wall Studs under Axial Compression;
550MPa高强冷弯薄壁型钢轴压墙体立柱承载能力试验研究
15.
Load-carrying Capacity Analysis of Concrete Filled Double Skin Steel Tubular Column with SHS Outer and CHS Inner Section under Axial Compression Combined with Biaxial Bending
方中空夹层钢管混凝土双向压弯构件承载力研究
16.
CALCULATING METHOD RESEARCH ON BEARING CAPACITY OF G450 COLD-FORMED CHANNEL COLUMNS UNDER AXIAL COMPRESSION
G450级冷弯薄壁型钢轴压柱承载力的计算方法探讨
17.
Calculation Method of Bearing Capacity of Rectangular Concrete-Filled Steel Tubular Members after High Temperature Subjected to Biaxial Force and Bending
高温后方钢管混凝土双向压弯构件的承载力计算方法
18.
Cold-Formed Steel Unlipped Channels Subjected to Concentrated Bearing Load;
冷弯薄壁非卷边槽钢承受集中荷载时的承载力