1.
Structure of axle box for heavy-duty 8-axle diesel locomotive
重载单节八轴内燃机车轴箱结构型式
2.
Structure Analysis and Modification Design of the VDL1000 Spindle Box
VDL1000主轴箱结构分析及改进设计
3.
It is introduced the structure characteristics and running conditions of the axle-hang box.
介绍抱轴箱体的结构特征和运行情况。
4.
Structural Improvement and Optimization of Spindle Box in a Coiling Machine Based on Finite Element Method
基于有限元的绕线机主轴箱的结构改进及优化
5.
Analysis of Vibration Characteristics and Structural Optimization for the Spindle Box in a Coiling Machine
绕线机主轴箱的振动特性分析及结构优化
6.
The Structure Design and Dynamic Analyses for Headstock of NC Boring and Milling Machine;
数控落地铣镗床主轴箱动力学分析与结构设计研究
7.
The Finite Element Analysis and Structure Rebuild for the LX150 Motorcycle Crankcase Box of the Substituted Material;
LX150摩托车曲轴箱材料替代有限元分析与结构改造
8.
Analysis on the Economical Advantages of Hub-and-Spoke Route Structure in Maritime Container Transportation;
海上集装箱运输中轴辐式航线结构的经济性分析
9.
Driving system consists of gearwheel box, universal shaft coupling and arc-gear synchronous belt, The driving mechanical parts are installed at the bottom, so it can avoid vibration.
传动系统采用齿轮箱、万向轴联轴器、圆弧齿同步带相结合型式，传动构件安装在底板，避震性好。
10.
Thousands of installations demonstrate the reliability and suitability of these simple and effective tools for sand production.
本机具有可更换磨损件，厚壁管和轴，带隔离结构下部轴承和特重负荷齿轮箱。
11.
The tank location for these vehicles is chosen for optimum airframe design for axial loads.
这些飞行器上的油箱位置是相对轴向载荷作最佳结构设计来选择的。
12.
Structures of Metso OptiFlo Head Box
Metso OptiFlo流浆箱的结构
13.
Structure design for a 4250 TEU container vessel
4250TEU集装箱船的结构设计
14.
Thermal and Structural Characteristic Analysis and Research of Case for Wind Turbine Generator Gearbox
风电齿轮箱箱体热结构特性分析研究
15.
Driving system consists of gearwheel box, universal couplings and arc-gear synchronous belt.
传动系统采用齿轮箱、万向轴联轴器、圆弧齿同步带相结合。
16.
The pumps include type A structure (ball bearing) or type B structure (sliding bearing).
泵的结构分为甲式结构（滚动轴承）和乙式结构（滑动轴承）。
17.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
18.
" Plain bearings-Thin-walled bearing shells-Dimensions, structure elements and tolerances"
GB/T3162-1991滑动轴承薄壁轴瓦尺寸、结构要素与公差