1.
Research of the Cylinder Sleeve and Piston Ring of Marine Diesel be Third Element Together Permeate Deal with Sulfur-charcoal Glow Ionic Nitriding;
船用柴油机气缸套及活塞环采用辉光离子硫碳氮三元共渗的研究
2.
new technology of ionitro-carbon-titanizing
离子氮-碳-钛三元共渗新工艺
3.
liquid carbonitriding
液体碳氮共渗, 液体渗碳氮化法
4.
Study on Oxycarbonitriding Processes with Air and Methane;
空气—甲烷氮碳氧多元离子共渗工艺的研究
5.
Gas Nitrocarburzing for 4Cr5MoSiV1 Steel
4Cr5MoSiV1(H13)钢的气体氮碳共渗
6.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
7.
An Investigation of the Conventional HSS Cutting Performance by SOCNB Complex Permeation Treatment Method
硫氧碳氮硼复合共渗高速钢刀具切削性能的研究
8.
Study on the hydrogen embrittlement phenomena of carbonitriding tape gear;
合金渗碳钢锥齿轮碳氮共渗的氢脆现象研究
9.
Investigation of Plasma Electrolytic Carbonitriding Technique in Solution;
液相等离子体电解碳氮共渗技术研究
10.
RE-nitrocarburizing Technology for Piston Rod Made of 40CrMnMo
40CrMnMo活塞连杆稀土离子氮碳共渗工艺
11.
RE-B-C-N multi-element penetration of 65Mn steel metal rubber with larger wire diameter
大丝径65Mn金属橡胶稀土硼碳氮共渗
12.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
13.
Research on Ion-nitrocarburizing Processes and Mechanism with N_2 and CH_4 for 40Cr;
40Cr钢氮气—甲烷离子氮碳共渗工艺及机理的研究
14.
Research on Surface Low Alloy Hss by Plasma Surface Metallurgy W、MO、C、Alloying Process;
钨、钼、碳三元共渗等离子表面冶金低合金高速钢的研究
15.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
16.
Research Hydrogen-free Carbonizing and Hydrogen-free Carbonitriding on Titanium and Titanium Alloy Ti6A14V by Double Glow Plasma Discharge;
钛及钛合金Ti6A14V双层辉光离子无氢渗碳及无氢碳氮共渗的研究
17.
The heat treatment technology of carbo- nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
钢的碳氮共渗热处理工艺具有共渗温度低、直接淬火等特点。
18.
Tribological Properties of Sulfur-nitrade Layer on Drilling Joint Material 35CrMo Steel
钻杆接头材料35CrMo钢硫氮共渗层的摩擦学性能