1.
The Probability Finit Element Analysis of Stiffness Dependability for Spindle of Machine Tool;
机床主轴刚度可靠性概率有限元分析
2.
The System Reliability Analysis of Steel Frames with Semi-rigid Connect;
半刚性连接的钢框架的体系可靠度的分析
3.
Research on Methods of System Reliability of Semi-rigid Steel Frame
半刚性钢框架结构体系可靠度计算方法的研究
4.
On prediction method of airfield rigid pavement based on reliability
基于可靠度的机场刚性道面剩余寿命预测方法
5.
"They are compacted in design and light in weight, also ensure steady rotation with high precision and high stiffness"
具有结构紧凑、重量轻、结构刚性好、运转平衡、精度高、安全可靠等特点
6.
Stability and Reliability Analysis of a Concrete-filled Steel Tube Cross-rigid Frame Bridge during Construction Period
钢管混凝土高墩连续刚构桥施工期稳定性及可靠度分析
7.
Topology Optimization Design of Continuum Structure Based on Non-probabilistic Reliability with Stiffness Constraint
考虑刚度非概率可靠性约束的连续体结构的拓扑优化设计
8.
Stiffness Reliability Study of Retaining Structure of Deep Foundation Pit Based on RBF-RS Method
基于RBF-RS法的深基坑支护刚度可靠度研究
9.
Airframe adopt desk style frame, It have enough intensity and strong, as well as assure to whole machine used precision and credibility.
机身采用框架焊接式结构，具有足够的强度和刚度,以保证整机的使用精度和可靠性。
10.
Optimization of Double Thin-wall Pier of Continuous Rigid-Frame Bridge Based on Reliability;
基于可靠度的连续刚构桥双薄壁墩优化设计
11.
Analysis of the Structural Reliability of Portal Frame Based on Response Surface Method
基于响应面法的门式刚架结构可靠度分析
12.
Seismic reliability analysis of rigid frame bridge based on response surface method
基于响应面法的连续刚构地震可靠度分析
13.
RELIABILITY ANALYSIS OF SEMI-RIGID STEEL FRAMES BASED ON PEAK DISPLACEMENT LIMITS
半刚性节点钢框架侧移限值的可靠性分析
14.
Study on dynamics simulation and reliability of solder joints of rigid-flex backplane
刚挠背板动力学仿真与焊点可靠性研究
15.
Primary Exploration on the OCS System Reliability and Study on Contact Line Reliability;
接触网系统可靠性初探及接触线可靠度研究
16.
Reliability and Safety Factor Comparison and 6σ in Reliability Design;
可靠度与安全系数的比较及可靠性设计中的6σ
17.
Optimization of Reliability and Optimum Design in Consideration of Reliability for Tapered Interference Articulation;
圆锥面过盈联接可靠度优化和可靠性优化设计
18.
Analysis of Sensitivity & Reliability of Turnning Machine
旋转机械的可靠性及可靠灵敏度的分析