说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 有限元响应面法
1.
Tensile reliability analysis of gravity dams by FEM response surface method
基于有限元响应面法的重力坝抗拉可靠度分析
2.
Application of the Method of Response Surface FEM Apply in Reliability Analysis of Existing Concrete Bridge;
响应面有限元法在既有混凝土桥梁可靠度分析中的应用
3.
Set Finite Element Method and Application Based on Response Surface and Optimization Theory;
基于响应面及优化理论的集合有限元法及其应用
4.
The Mechanics Response Analysis of Asphalt Pavement with 3D Finete Element Method;
沥青路面力学响应的三维有限元分析
5.
Study on the slope reliability by coupling the response surface method and the strength reduction finite element method
响应面与强度折减有限元耦合的方法研究边坡可靠度
6.
The Temperature and Stress Distribution of Wheel/Rail Due to Friction Based on FEM;
基于有限元法的轮轨摩擦热响应分析
7.
The Soil Dynamic Response Based on 2.5D Finite-element Method;
2.5维有限元法计算地基土的动力响应
8.
The Implementation and Application of OOPFEM Element Re-subdivision Algorithm;
面向对象有限元单元重剖分算法的实现及应用
9.
Application of stress strain finite element method in slab rockfill dam design
应力应变有限元法在面板堆石坝设计中的应用
10.
A SELF-ADAPTIVE FEM FOR FREE VIBRATION ANALYSIS OF PLANAR CURVED BEAMS WITH VARIABLE CROSS-SECTIONS
平面曲梁面内自由振动分析的自适应有限元法
11.
A Study on FEM for Thermo-hydro Stress in Plane Viscoelastic Bodies and its Application;
平面粘弹性体热—湿应力有限元法及应用研究
12.
The finite element analysis of mechanical response of overload on cement concrete pavement
超载对水泥混凝土路面力学响应的有限元分析
13.
Dynamic Analysis of Pavement on Longitudinal Slope by Finite Element
有限元分析纵坡路段路面结构动态力学响应
14.
Finite Element Analysis and Optimum of Tungsten Carbide Anvil on Multi-anvil High Pressure Devices;
有限元法在六面顶顶锤优化设计中的应用
15.
Application of Planar FEM in 2-D Potential Fluid Problems
平面有限元法在二维势流问题中的应用
16.
Finite Element Analysis Method for the Stress Intensity Factor of Surface Cracks
块体表面裂纹应力强度因子有限元方法研究
17.
Study on Dynamic Response of Tank Coupling System under Vertical Excitation by ALE Finite Element Method
基于ALE有限元法的储液罐耦合竖动响应研究
18.
Impact of thermal stress change on casing by using finite element method
利用有限元法研究热应力变化对套管的影响