1.
A Method for Solving Minimal Dimension of the Disc Cam Mechanism with Translating Follower
求解直动推杆盘形凸轮最小尺寸的一种方法
2.
Design and analysis of a cam mechanism with straight moving follower based on VB
基于VB的直动推杆盘形凸轮机构的设计及分析
3.
A Right Method for Determining the Minimum Size of a Disc Cam with a Translating Follower by Allowing Pressure Angle
按许用压力角确定直动推杆盘形凸轮机构最小尺寸的正确解法
4.
Research and Discussion on Concave-are Bottomed Translating Follower Disc Cam Mechanisms
关于正置式凹弧底直动推杆盘形凸轮机构的探讨
5.
Based on CAD Environment Graphic Method Design Translation Apex Throwout Lever Disk Cam
基于CAD环境下设计直动尖顶推杆盘形凸轮
6.
Fundamental Dimensions of Disc Cams with Translating Roller Followers
直动滚子推杆盘形凸轮机构的基本尺寸
7.
lever-actuated pusher type stock guide
杠杆动作推杆式导料板
8.
"This movement causes the pitman arm, attached to the sector, to swing to the right or left. This action, in turn, pushes or pulls on the tie rods attached to the pitman arm."
这一运动又依次推动或拉动与转向摇臂相连的转向直拉杆。
9.
The normalised fittings and nomogram of fundamental dimensions of disc cams with translating roller followers
直动滚子推杆盘形凸轮机构基本尺寸的诺模拟合及诺模图
10.
pusher-equipped sircraft
装有自动推杆器的飞机
11.
Use for push rod see the "Operation instruction of electric hydraulic push rod."
推杆的使用请查阅《电液动推杆使用说明书》。
12.
P) Friction locks cause throttle lever to stick.
(问)推力杆锁锁定了推力位置，不能动。
13.
direct power acting push sweep rake
直接动力作用推扫耙
14.
"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "
"在这种装置中,凸轮轴直接装在气门挺杆下,并且不必有推杆或摇臂。"
15.
A rope or rod running vertically on the forward side of the mast on which the yard moves.
帆桅支索，纵竖索杆在桅杆前面垂直运动的绳或杆，帆桁在此上移动
16.
worm-type mechanical hand-feed drill
蜗杆式机械手动推进钻机
17.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
18.
Push the lever, and the machine will start.
一推操纵杆，机器就开动了。