1.
Calculation of Annular Clearance Leakage for the Plunger and Pump Barrel of Sucker-rod Pump
抽油泵柱塞和泵筒环隙漏失量计算的新公式
2.
Technical specification of fuel injection pump plunger and barrel assembly for diesel engines
GB/T5264-1985柴油机喷油泵柱塞偶件技术条件
3.
Study on TiC/NiCrBSi Cladding Layers by Laser Cladding In-situ Fabricated on the Surface of Oil Well Pump Plunger
抽油泵柱塞表面激光合成TiC/NiCrBSi熔覆层研究
4.
Solve the downgoing resistance of pump plunger based on dimensional analysis
基于量纲分析法求抽油泵柱塞的下行阻力
5.
Experimental Research on Plunger Matching Parts of Injection Pump Worn by DME-Diesel Blends;
二甲醚一柴油混合燃料对高压油泵柱塞偶件磨损的实验研究
6.
Contrast Experiment Research on Plunger Matching Parts Assembly of High Pressure Oil Pump Worn by Diesel Fuel and DME-Diesel Blended Fuel;
柴油、二甲醚—柴油混合燃料对高压油泵柱塞偶件磨损的对比试验研究
7.
Testing System Design for Investigating the Properties of Oil-Film between Piston and Cylinder in Axial Piston Pump;
轴向柱塞泵柱塞副油膜特性测试系统研究
8.
Technical requirements for jerk fuel injection pump
GB/T5770-1997柴油机柱塞式喷油泵总成技术条件
9.
Calculation and analysis on film thickness of the slippers based on hydrostatic bearing in the aeronautical fuel piston pump
航空燃油柱塞泵滑靴静压润滑油膜计算分析
10.
displacement pump
往复式泵，活塞泵，柱塞泵，排代泵
11.
ZB-100 hydraulic oil pump s fault research and design scheme;
ZB-100型柱塞式液压油泵故障研究及改进方案
12.
Study on Virtual Prototype and Pressure Characteristics of Oil Film for Axial Piston Pump
轴向柱塞泵的虚拟样机及油膜压力特性研究
13.
Principle of Oil Film Test on Port Pair of Axial Piston Pump and Control Characteristics
轴向柱塞泵配流副油膜试验原理及控制特性
14.
Efficient FEM Approach for Pressure Analysis of Oil Film in a Piston Pump
柱塞泵油膜压力分析的高效有限单元法
15.
high and ultra-high pressure plunger pump
高压与超高压柱塞泵
16.
port plate axial piston pump
配流盘式轴向柱塞泵
17.
The plunger or piston of a force pump or hydraulic press.
活塞压力泵或水压机内的柱塞或活塞
18.
lubricating oil and piston cooling oil pump
润滑油及活塞冷却油泵