说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 平均压溃载荷
1.
The prediction of the mean crushing load agrees well with the experimental data.
计算结果表明新的平均压溃载荷计算公式能够更好地拟合实验结果。
2.
irregularly distributed load
非匀布荷载;不规则分布荷载;不均匀分布荷载;不平匀分布荷重
3.
Strut-and-tie Model of Deep Beam Design Under Uniform Distributed Loads
均布荷载下深梁设计的压杆-拉杆模型
4.
empty-side uniformity load
空载侧线路均布载荷
5.
load-side uniformity load
重载侧线路均布载荷
6.
INTERNAL FORCE ANALYSIS AND SIMPLIFIED CALCULATION OF CURVE BEAM UNDER UNIFORM LOAD;
均布荷载下平面弧形梁内力分析与简化计算
7.
Numerical simulation of mean wind load on large hyperbolic cooling tower
大型双曲冷却塔平均风荷载的数值模拟研究
8.
Numerical simulation of mean wind pressure on roof and canopy of Wuhan railway station
武汉火车站屋盖与雨棚平均风荷载的数值模拟
9.
INFLUENCE OF STRETCHING TECHNOLOGY ON LOAD NON-UNIFORM COEFFICIENT OF PRESSURE-DISPERSIVE ANCHOR CABLE
张拉工艺对压力分散型锚索荷载不均匀系数的影响
10.
Mean BP, heart rates, and BP loads were not different between daytime or nighttime.
平均血压、心率和血压负荷白天和夜间没有显著性差异。
11.
joint contact surface
连接接触面总压紧载荷
12.
Study on Dynamic Characteristics of Pressure Vessels with Flat-wound Steel Ribbon Subjected to Explosion Loading;
扁平绕带式压力容器在爆炸载荷作用下的动力特性研究
13.
Experimental Study and Numerical Simulation of the Flat Ribbon Wound Pressure Vessels Subjected to Internal Blast Loading;
爆炸载荷作用下扁平绕带高压容器实验研究和数值模拟
14.
Research on Mechanical Performance of Concrete-filled Tubular CFRP Steel Stub Column under Axial Compressive Loads and Lateral Loads
CFRP钢管混凝土柱在轴压和水平荷载下力学性能的研究
15.
Research on the Effect of upper Structure and Loads for Behaviors of Composite Masonry Walls with Holes Which are Eccentrically Compressed
上层结构与荷载对开洞组合砖墙出平面偏心受压性能的影响研究
16.
Study on the Loads Equivalence and Transferring Behavior of the EPB Shield Machines Penetrating in the Heterogeneous Geological Conditions
异质岩土工况下土压平衡盾构载荷等效及传递特性研究
17.
Research on calculation method for lateral pressure ultimate load on cylindrical shell panel of Spar platform hard tank
Spar平台柱壳板格侧向压力极限载荷计算方法研究
18.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。