1.
It's a important join component of hydrogenerator main shaft fasten joint bolt.
水轮发电机主轴联轴螺栓是水轮发电机重要的联接部件。
2.
hydrauliccone-bolt coupling
液力锥形螺栓联轴器
3.
Contact analysis of MW wind turbine hub and bearing bolt connection
风力机轮毂和轴承螺栓联接接触分析
4.
conveyer screw shaft coupling
输送机螺旋轴联轴节
5.
Compared with conventional coupling bolts, the hydraulic radial-fit bolts can effectively prevent unsmooth stagnation.
与传统联轴器螺栓相比，液压螺栓能有效地防止卡涩和咬死。
6.
Analysis of process of crankshaft of bolt combined automatic cold header in the lathe;
车床加工螺栓联合自动冷镦机曲轴工艺浅析
7.
The rear axle is stationary, and is bolted rigidly to the main frame.
后轴是固定的，用螺栓刚性固定在主机架上。
8.
Remove nuts, U-bolts and spring bracket from axle.
由车轴拆下螺帽，U型螺栓和弹簧支架。
9.
Joint-axis Bolt Stretch Value of the Turning Wheel of Three Gorges Right Bank Hydropower Station and Safety Factor Analysis
三峡右岸电站转轮联轴螺栓伸长值取值及安全系数分析
10.
Bolt( screw, nut, stud, spring washer, pin, ball bearing, roller bearing) is the most commonly used machine part.
螺栓（钉、帽、头螺栓、簧垫圈、、珠轴承、柱轴承）最常用的机械零件。
11.
Remove the universal joint strap bolts at the pinion shaft yoke.
在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
12.
Install the straps and bolts to hold the propeller shaft to the yoke.
安装扣夹和螺栓，将传动轴固定到轴轭上。
13.
bonding of propeller to shaft
螺旋桨与轴胶合联结
14.
The Fracture Failure Analysis on Main Bearing Bolts of the Diesel Engine and Investigation on Its Loading Behaviours;
柴油机主轴承螺栓断裂及其承载力学行为的研究
15.
Research and Design on the Backpressure Device and Bolt Assembly System in the Fracture Splitting Equipment of Main Bearing Walls on an Engine Block;
缸体主轴承座裂解加工背压装置及螺栓装配系统研制
16.
Research and Design on Automatic Assembling Bolts System for Fracture Splitting Crankcase Bearing Block of Engine;
裂解发动机箱体主轴承座螺栓装配系统研究与设计
17.
Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。
18.
Lock rings at the end of shaft with bolt
GB/T892-1986螺栓紧固轴端挡圈