1.
3D FINITE ELEMENT ANALYSIS OF SIF OF THE STRUCTURE WITH DIMPLE HOLE
锪窝孔边扇形角裂纹应力强度因子的三维有限元分析
2.
Analysis and Precaution on Welding Crack at Caster Segment Lower Frame
连铸机扇形段下框架焊接裂纹分析与预防措施
3.
Large deformation bands were observed at each side of the crack.
实验结果表明：在裂尖两侧存在与裂纹方向夹角约为50°大变形带。
4.
Pyramidal horn and sectorial horn
角锥喇叭和扇形喇叭
5.
develop a fine network of cracks.
形成一个网状的裂纹。
6.
It was concluded that failure of double clip reed was the result of local stress concentration and cracking at the sharp elbow of reed.
双卡簧片成形时弯角较尖锐并有明显裂纹是导致失效的原因。
7.
die C tear strength
撕裂强度（直角形）
8.
Formation Mechanism and Prevention of Center and Triangle-Zone Cracks in Continuous Cast Slabs
板坯中心裂纹和三角区裂纹的成因与防止
9.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
10.
corals having a treelike or fan-shaped horny skeleton.
由树形或扇形的角状骨骼的珊瑚。
11.
The formation of cracks on the surface of paint layers.
油画层皱裂油画表层裂纹的形成
12.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
13.
scalloped surface
扇形表面, 扇壳饰
14.
bubble quadrant
带汽泡水准的扇形测角仪
15.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
16.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
17.
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
18.
Research of the Relative Sensitivity of the Sector Split-Drain Magnetic Field-Effect Transistor;
扇形分裂漏磁敏场效应晶体管相对灵敏度研究