1.
Discussion and Practice of Rear Bearing Maintenance on Sub-critical 600 MW Generator
![点击朗读](/dictall/images/read.gif)
上汽厂亚临界600MW机组尾部轴承检修
2.
Analysis on the Problem of Axial Clearance Installation of Tail Pipe Beam of Certain Aircraft
某型飞机平尾管梁轴承轴向间隙问题的分析
3.
governor upper bush
![点击朗读](/dictall/images/read.gif)
调速器上部轴承衬套
4.
governor bottom bush
![点击朗读](/dictall/images/read.gif)
调速器下部轴承衬套
5.
radial bearing upper drive sub
![点击朗读](/dictall/images/read.gif)
上部径向轴承传动接头
6.
radial bearing lower drive sub
![点击朗读](/dictall/images/read.gif)
下部径向轴承传动接头
7.
roll-chock washing machine
![点击朗读](/dictall/images/read.gif)
轧辊轴承部件清洗装置
8.
The top end bracket shall be fitted with a stainless steel lifting bail and shall be capable of supporting the combined weight of the pump and motor.
顶部尾轴承架应该配置不锈钢吊环,应该能够支撑泵和电机的总重量的压力。
9.
The top end bracket shall be fitted with a lifting bail and shall be capable of supporting four (4) times the combined weight of the pump and motor.
顶部尾轴承架应该配置吊环,应该能够支撑泵和电机的总重量四(4)倍的压力。
10.
MAIN BEARING JOURNAL DIAMETER (CRANKSHAFT REMOVED)
![点击朗读](/dictall/images/read.gif)
主轴承颈部直径(曲轴已卸去)
11.
Numerical Caculation and Experimental Research on Ship Water Lubricated Stern Bearing;
![点击朗读](/dictall/images/read.gif)
船舶尾轴承水润滑特性数值计算与试验研究
12.
Key Technology Study and Performance Test of Rotating Liner Cementing
![点击朗读](/dictall/images/read.gif)
旋转尾管悬挂器轴承的研制及性能试验
13.
First you need the boring for the shaft, then install the stern tube into the stern frame, next fit the gun-metal or white-metal bush.
首先要镗孔,然后安装尾轴管,接下来装炮铜或白合金制的轴承套,也叫轴承。
14.
The stern bearing of ship shaft is cylindrical journal bearing which is often ubricated by oil.
船舶轴系的尾轴承是圆筒形径向滑动轴承,中小型船舶多采用油润滑的方式。
15.
All bearings are rolling bearings and the shafts are made of alloy steel.
![点击朗读](/dictall/images/read.gif)
轴支承全部采用滚子轴承。轴材料均为合金钢。链条均为强制润滑。
16.
The part of a machine shaft or axle supported by a bearing.
![点击朗读](/dictall/images/read.gif)
轴颈机械的转动轴或轮轴中由轴承所支撑的部分
17.
Shaft Assembly (Male, female, washer, grease….
![点击朗读](/dictall/images/read.gif)
轴组件(轴,轴套,轴承,油脂。。。)
18.
The main components of a spider cardan joint include the spider, yokes and quill bearings, etc.
其主要部件包括十字轴、向节叉以及滚针轴承等。