1.
Investigation of the igniting capability of ESD sparks
典型静电放电火花点燃能力测试研究
2.
lepel quenched spark-gap
盘形猝熄火花放电器
3.
triggered spark gap
触发放电器触发火花隙
4.
spark discharge particle generator
火花放电粒子发生器
5.
Study on the Discharge Mechanism and Technology in Powder-mixed EDM;
混粉电火花加工放电机理及工艺研究
6.
sometimes termed sparkover or flashover when the discharge is on the external surface
当放电在外表面时称为火花放电或闪络
7.
fixed spark-gap modulator
固定间隙火花放电调制器
8.
Research on the Influence of Spark Discharge to HCCI Combustion Process;
火花放电对HCCI燃烧过程影响的研究
9.
Selectivity of Spark Discharge Paths in Point/Point Gap in Air
尖端-尖端的火花放电路径的选择性
10.
electric ignition
电火花点火,电气点火
11.
Surface Modification Technology of EDM with Silicon Electrode
硅电极电火花放电的表面改性技术研究
12.
Simulation of Discharge Channel for Non-conductive Ceramics During Electrical Discharge Machining
非导电工程陶瓷电火花加工放电通道模拟
13.
Large static charges may build up in the bed causing spark discharges.
大量静电荷可能在床内积聚而引起火花放电。
14.
Study on volt-ampere properties in WEDM
电火花线切割加工中放电间隙伏安特性的研究
15.
Thick wall model simulation of EDM spark locations detection
电火花加工放电位置检测厚壁模型的仿真
16.
Real-time Detection and Discrimination of Discharging States in Micro Electrical Discharge Machining;
微细电火花放电状态的实时检测和辨识技术
17.
The Methods and Programming of Electrical Discharging States in Micro Electrical Machining;
微细电火花放电状态智能检测方法及程序设计
18.
Designs of Charge and Discharge Circuit Systems in Underwater Sparker Acoustic Equipment;
水下电火花声源装置中充放电回路系统的设计