说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 烧结配料过程
1.
Intelligent Integrated Modeling and Synthetic Optimization for Blending Process in Lead-Zinc Sintering
铅锌烧结配料过程的智能集成建模与综合优化方法
2.
Different Fuel Addition Process and Its Effect on Sintering Process
不同燃料配加工艺及其对烧结过程的影响
3.
Investigation on Characteristics of SO_2 Emission during Temperature Increasing of Sintering Materials
烧结原料加热过程中SO_2排放特性的实验研究
4.
Study on Temperature Control During the Sintering Procedure of PTFE Composites
聚四氟乙烯复合材料烧结过程温度控制研究
5.
Study on Surface Heat-Dissipating Behavior of Sinter Cake in Iron-Ore Sintering Process
铁矿烧结过程料饼表面的散热行为研究
6.
Slagging characteristics on refractory materials during pulverized-coal combusting
基于耐火材料的粉煤燃烧过程结渣特性
7.
Influence of MoS_2 contents on sintering process of Cu-MoS_2 composites
MoS_2含量对Cu-MoS_2复合材料烧结过程的影响
8.
Distribution of mixture for adding fuel separately in the micropellet sintering processing must be notice, otherwise the heat system in sinter would be destroyed.
燃料分加小球团烧结时必须注意混合料布料问题,否则会破坏烧结过程热制度。
9.
Strengthen the Control of the Whole Process of Sintering And Keep the Stability of the Quality of Sinter
加强烧结过程控制与稳定烧结矿质量
10.
Simulation Study on Microstructure Evolution of Ceramic Tool Materials during Fabrication;
烧结过程中陶瓷刀具材料微观组织结构演变模拟研究
11.
Sintering Burdening Optimization Taking Properties into Account Based on NSGA-Ⅱ
基于NSGA-Ⅱ考虑性能的烧结矿配料优化
12.
An integrated prediction model for burn-through-point in lead-zinc sintering process
铅锌烧结过程烧穿点的集成预测模型
13.
Experimental Study on Increasing Si and C Using the Waste Material of Graphite Electrode during Metallurgical Melting Process;
冶金熔化过程中利用电极烧结废料增硅增碳的实验研究
14.
Research on Technical Process and Properties for Reaction Formation and Post-Hot-Pressing Preparation of Si3N4/MoSi2 Composite;
反应形成—热压烧结制备Si3N4/MoSi2陶瓷材料的工艺过程及性能研究
15.
Numerical Simulation of the Process of Fuel Combustion in the Burnre with Different Distribution of Wind
配风比对燃油燃烧器燃烧过程影响的数值模拟
16.
PRODUCTION TO ADD WASTE IRON AND STEEL MATERIAL IN SINTERING PROPORTIONING
宣钢烧结配料添加钢铁废弃料的生产实践
17.
Optimization of Burden Structure with High-alumina Sinter plus V-Ti Magnetite
高铝烧结矿配加钒钛磁铁矿炉料结构优化研究
18.
Research on the Gas Permeability in the Acid Pellet Sintering Process;
酒钢球团烧结法新工艺烧结过程透气性研究