1.
Judgement and Application of Ignition Moment During Engine Startup Period Based on Crankshaft Transient Acceleration Analysis
基于曲轴瞬时加速度分析的发动机启动过程着火判定与应用
2.
instantaneous state of velocity
瞬时速度, 速度的瞬时状态, 速度瞬时值
3.
CONFIRMING OF THE CENTER OF ACCELERATION AT INITIAL INSTANT OF MOTION AND ITS APPLICATION;
运动初瞬时加速度瞬心的一种确定方法及应用
4.
Method of Estimating Instantaneous Velocity of Axis with Optical Encoder;
用光电码盘估计轴系瞬时速度方法的研究
5.
The point is named instant center acceleration.
这一点称为刚体的瞬时加速度中心.
6.
Meanwhile, the fracture was accelerated due to the uneven surface hardness and the unreasonable distribution of the hardening layer on the crankshaft, and the bad lubrication condition in service.
同时轴左颈表面硬度不均匀、淬硬层分布不甚合理，工作过程中润滑条件差，加速了曲轴的断裂。
7.
engine cut-off velocity
发动机停车瞬时速度
8.
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。
9.
High Speed Grinding with CBN Grit Wheel for Camshaft Manufacturing of Engine
发动机曲轴凸轮轴CBN高速磨削加工
10.
The job of the timing belt is to turn the camshaft(s) at exactly 1/2 the speed of the crankshaft while maintaining a precise alignment.
正时皮带的工作是:当保持精准定位时调整凸轮轴的运转速度为曲轴速度的一半.
11.
Research on Feedrate Optimization for Mould Cavity Machining Based on Instantaneous Milling Force Model;
基于瞬时铣削力模型的模具型腔数控加工进给速度优化研究
12.
piezoelectric triaxial accelerometer
压电式三轴加速度计
13.
Numerical Simulation of Liquid Sloshing in an Axisymmetric Tank with Acceleration;
有加速度时轴对称贮箱内液体晃动的数值模拟
14.
Equivalent Modeling for Axisymmetric Tank of Spacecraft with Accelerate
轴对称充液贮箱有加速度时的等效建模
15.
Sometimes temporal fluctuation may take place inthe local velocity.
有时，在局部速度中可能出现瞬时脉动。
16.
Solving the real-time velocity/acceleration in machining a free-form surface with a parallel robot
求解并联机器人加工自由曲面的实时速度/加速度
17.
all-burnt acceleration
完全燃尽瞬间加速度-火箭
18.
Prompt acceleration with high gradients has advantages.
利用高梯度达到瞬间加速有它的好处。